Hi all recently I have brought a 42" pioneer plasma and will be wall mounting it but Im not sure on what mount to buy as most look cheap and like they will break and bow if I was to hang a 30kg plasma on them, what would you suggest thank you ?
Good sturdy wall mount for Plasma
Collapse
X
-
Good sturdy wall mount for Plasma
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Tags: None -
Re: Good sturdy wall mount for Plasma
My 50" Pioneer Kuro, a ~40kg TV, is held up by a £9.99 eBay wall mount. Been up for near 7 months now.
It's really the fixing into the wall that matters, the brackets themselves are sturdy enough. In my case, I used very thick threaded bolts into a red brick chimney. Eight of them. The bolts cost £12 for 8, but they are worth it for the peace of mind. Any two bolts can support the full weight of the TV. I did NOT use the raw plugs that come with the bracket; I would not use them on a TV bigger than 32" myself.
Make sure your TV uses a VESA-compatible mount pattern; most brackets are made for this.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Good sturdy wall mount for Plasma
My 50" Pioneer Kuro, a ~40kg TV, is held up by a £9.99 eBay wall mount. Been up for near 7 months now.
It's really the fixing into the wall that matters, the brackets themselves are sturdy enough. In my case, I used very thick threaded bolts into a red brick chimney. Eight of them. The bolts cost £12 for 8, but they are worth it for the piece of mind. Any two bolts can support the full weight of the TV. I did NOT use the raw plugs that come with the bracket; I would not use them on a TV bigger than 32" myself.
Make sure your TV uses a VESA-compatible mount pattern; most brackets are made for this.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Good sturdy wall mount for Plasma
It's a good panel. I've heard with some tweaks black level can rival a 50" 9G. Shame Pioneer never made a 42" 1080p panel - that would absolutely rock for a bedroom screen.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Good sturdy wall mount for Plasma
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Good sturdy wall mount for Plasma
Got the tv and bloody hell I love it only been watching daytime tv but by god it looks great
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
Related Topics
Collapse
-
TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage and promote a safe environment for electronic and electrical equipment, our single-use chip fuses provide performance stability to support applications with current ratings from .5A up to 20A.
TE Circuit Protection also offers the telecom FT600 fuse for telecommunications applications. This telecom fuse helps comply with North American overcurrent protection requirements, including Telcordia, GR-1089,...-
Channel: Common Parts Library - Datasheets
10-07-2024, 06:07 AM -
-
by irepair559PS4 1215A HDMI DIODE READINGS GOOD EVERYTHING GOOD BUT NO PIC? everything is good! what else can it be? if hdmi diode values are good that means encoder and filters are good right? idk what else it can be guys...01-05-2023, 12:32 AM
-
by MgiffuneI have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
by momakaBoston Acoustics fans, this thread might not be for you.
A few years back (~2018 time frame), I picked up a set of free JVC speakers from someone on Craigslist that no one seemed to be interested in. The guy also had a single Boston Acoustics HD8 speaker – yes, just one cabinet. He said he had no idea where he got this one from or why it's only by itself. But like the JVC speakers, it was going to get tossed at the end of that week… so I came to collect, as usual.And that's all I know about this HD8. After all, I figured why not take it and see what's inside… show it to the...
-
Channel: Troubleshooting Audio Equipment
-
-
by salim5566Hi guys i like to buy tool that automatic unlock bios or find password also can flash and repair bios ic, looking for good tool have good software that have 1 click and unlock bios any recommend good tool? looking for sony ps5 and and laptop bios
Thanks-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment