Question for the Plasma Gurus on my Panasonic TC-P55ST30 - Screen damaged

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • freakaftr8
    Badcaps Legend
    • Oct 2012
    • 3743
    • USA
    #21
    Re: Question for the Plasma Gurus on my Panasonic TC-P55ST30 - Screen damaged

    If i ever run into this I wonder what would clear rtv silicone would do? Considering the expanding and contracting thermal properties. If it ever let's go you could possibly attempt this.
    Did I leave the soldering iron on?

      Comment

      • aaronwt6
        Badcaps Veteran
        • Apr 2013
        • 855
        • US
        #22
        Re: Question for the Plasma Gurus on my Panasonic TC-P55ST30 - Screen damaged

        That might be a decent alternative. I just used the ultra thin, standard super glue. You know, the kind you better not touch your fingers together with. Not even for a second.

          Comment

          • freakaftr8
            Badcaps Legend
            • Oct 2012
            • 3743
            • USA
            #23
            Re: Question for the Plasma Gurus on my Panasonic TC-P55ST30 - Screen damaged

            Just curious Aaron how's that tv holding up after the fix?
            Did I leave the soldering iron on?

              Comment

              • aaronwt6
                Badcaps Veteran
                • Apr 2013
                • 855
                • US
                #24
                Re: Question for the Plasma Gurus on my Panasonic TC-P55ST30 - Screen damaged

                Originally posted by freakaftr8
                Just curious Aaron how's that tv holding up after the fix?
                I just came across this while looking through my old posts. Still watching the TV and the issue has never re-surfaced.

                  Comment

                  Previous 1 2 template Next

                  Related Topics

                  Collapse
                  • tofik
                    PANASONIC TX-P42X10Y Plasma TV damaged after a power spike
                    by tofik
                    Hello, I have an PANASONIC TX-P42X10Y Plasma TV, purchased new in 2009.
                    Unfortunately plasma is not working at all after a power spike. Standby LED is not even working.

                    I did some quick tests, YSUS + ZSUS MOSFETS and IGBT's are free from shorts, diodes on these modules seems to also be fine, buffer board is free from shorts as well.

                    Anyway I focused mainly on the PSU, did some voltage tests with the results as below, I attached them on the photo (also please see attached PDF with the SERVICE MANUAL for this model, page number 43).

                    I understand...
                    02-17-2023, 02:34 PM
                  • jm1234
                    Panasonic plasma TX-P42ST50 - 6 blinks
                    by jm1234
                    Hi,
                    anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
                    It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
                    I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
                    I checked that board for any obvious faults...
                    05-22-2024, 06:59 AM
                  • stecos
                    Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                    by stecos
                    Hi everyone!
                    I happened several times, in the search for help from the web, to consult this very interesting forum.
                    So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                    Having said that I come to the gist of my post on the forum as the title suggests.
                    For my passion for technology I'm now collecting several...
                    11-28-2022, 11:39 AM
                  • tofik
                    LG 50PA6500 Plasma TV damaged after a power spike
                    by tofik
                    Hello, I have an LG 50PA6500 Plasma TV, purchased new in 2012.
                    Unfortunately plasma is not working at all after a power spike.

                    Qucikly tested the PSU and voltages seems to be okay, when eveything is disconntected from the PSU I got:
                    VS = 200-206 / actual = 205 V,
                    VA = 55 / actual = 54.9 V,
                    M5V = 5.2 / actual = 5.19 V,

                    17 = 17.24 V,
                    5.2 = 5.19 V,
                    STDBY = 5.19 V,
                    ERROR_DET = 4.8 V - does it mean PSU is damaged? the rest of the voltages seems to be fine.
                    what's your opinion about the PSU?

                    Also I just...
                    12-20-2022, 03:08 PM
                  • SurrealMustard
                    What parts can be salvaged from a plasma with a damaged display panel?
                    by SurrealMustard
                    I recently found myself the proud owner of a later-model Samsung plasma (the PN59D7000 for those keeping score at home) whose panel was, unfortunately, damaged in transport. I'm now preparing to part it out, but am curious as to whether or not any damage would have come to any of the components by attempting to power it up with the panel being broken. I read in one Avsforum thread (for whatever that's worth 😂) that the "scan driver boards" (by which I assume he means buffer boards) could be impacted by doing so. Is that actually the case? If so, since I don't intend on selling bad...
                    03-09-2025, 08:29 PM
                  • Loading...
                  • No more items.
                  Working...