Syntax Olevia LT27HV 27-Inch

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sky_Davis
    New Member
    • Dec 2014
    • 4
    • USA

    #1

    Syntax Olevia LT27HV 27-Inch

    Hello all, first post

    Got this TV for free, the lady says that they used it as a PC monitor because of a "hi-pitched tornado" like noise from the speakers when initially turned on. I brought the unit home, powered it up, and the screen just cycles blue, off and on. When it kicks off, the speakers "pop". No "tornado noise" at all at any time either. Also, none of the buttons on the front panel seem to work, even the off button. It just cycles; blue on, "pop", screen off.

    I instantly thought "bad caps on PSU, easy peasy". Upon tearing the unit apart, there are no caps that are visibly bad on either board (T-CON or PSU). No bulging vents, no leaks, no rubber squeezing out of the bottoms, etc.

    Anyone know of anything to start me in the right direction, other than bad caps on PSU that look good? Hoping to give this to the kids for Christmas in a few weeks. Thanks!
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Syntax Olevia LT27HV 27-Inch

    Please start with this:
    https://www.badcaps.net/forum/showthread.php?t=39740
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • Sky_Davis
      New Member
      • Dec 2014
      • 4
      • USA

      #3
      Re: Syntax Olevia LT27HV 27-Inch

      Here they are Bud, if they aren't good enough please let me know and I will try and get some better exposures.

      I took the PSU to a local television repair shop today and managed to get him to check the ESR of the caps. He claims none of them read very high, and that the PSU checks out.

      Thanks in advance,
      Sky
      Attached Files

      Comment

      • Sky_Davis
        New Member
        • Dec 2014
        • 4
        • USA

        #4
        Re: Syntax Olevia LT27HV 27-Inch

        Bump

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #5
          Re: Syntax Olevia LT27HV 27-Inch

          https://www.badcaps.net/forum/attach...2&d=1417556251
          There are voltage labels for each pin of the connectors, what dc voltage do you get at all those pins when TV is off AND when power switch is activated? Make to sure to list the pin name for each reading.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          Related Topics

          Collapse

          • edugimeno
            (old) LG 32lk330 cycles Backlight 3 times and then OFF
            by edugimeno
            Hi!! I have been given this old TV set.
            When I hit the power button, the BL (as you know this is a CFL backlight) turns on, video works fine as I can see the LG logo show off, but the backlight starts going on-off for 3 times, when it gives up and turns completly off
            This set has a inverter board on the top right corner. This inverter (or the tubes, I don't really know) buzzes very loudly during the second that the BL stays ON. I have posted a video, turn your volume UP!

            https://fileport.io/9EdfmD5qtEaw

            I have checked voltages at the PS
            All normal voltages...
            12-11-2023, 01:28 PM
          • angeloavv
            ASRock H81M-DG4 power cycles and glitches - sometimes POSTs sometimes not
            by angeloavv
            Hello everyone! This is my first post and this motherboard is driving me crazy because everything looks so non-trivial that I don't know where to start investigating. During these days I believe I watched half of the YouTube videos trying to understand how to troubleshoot power cycles but at the same time, I'm confused because my motherboard doesn't always do that and sometimes completes the POST for a few seconds: the right amount of time to freeze, show glitches on the screen, and then reset itself.

            Let me give you a bit more context to understand why and how we got here.
            ...
            12-26-2023, 03:32 PM
          • flusher
            Apple MBP16" A2141 820-01700 PMIC power cycles no boot no shorts
            by flusher
            Bought myself a project thing. Apple MBP16" A2141 820-01700
            No shorts, no visible waterdamage.
            Dead. no history.
            All USBC ports do 20V and charging battery.
            If you plug battery/charger PPBUS is 12.6v and all power rails like RTC, 3v3, 5v etc are present. U7800 PMIC all voltages are present APART from PPVCCPRIMCORE_PRIM_REG (not sure if it has to be present at this stage?! resistance is 40 Ohm). SSD 2.5, 0.9, 1.8 are present on both wings. Charger meter shows 30ma or something like this on charged battery.
            But what PMIC does is that it power cycles(dropping to...
            02-21-2025, 03:12 PM
          • nath1977
            Samsung F7000 occasionally cycles and fails to switch on
            by nath1977
            I have a UE40F7000 Samsung which occasionally fails to properly come out of standby. The relay clicks and the backlight flashes but then goes off again with a click, and repeats. I think its temperature related as leaving it overnight seems to allow it to switch on OK.

            I assume its PSU related and had a look - it's a BN44-00632B. No signs of swollen caps or hot components.

            I saw a great YouTube video on a possible PFC related issues and an underrated resistor https://youtu.be/DREofE4WIvg?feature=shared though a quick trace from the SPC7011F pin 7 lead me to a resistor...
            12-27-2024, 11:10 AM
          • abajor
            A2141 820-01700 Water Damage L8504 Damaged, U3100/U3200 power cycles UB300/UB400 5V .25A
            by abajor
            Like title says A2141 came in with Water Damage, customer desperately wants the data.

            The actual water ingress doesn't appear too bad it sat for a day but was very dusty internally. I have no idea why L8504 was arced there is no apparent moisture there or around the LVDS cable; however, the LVDS to screen screw studs had popped off at some point and somebody tried securing it with kapton tape.

            I had to create a micron wire pad jumper to reconnect the south side of the L8504 since the primary pad was blasted down to the vias.

            That said after cleaning up the...
            12-21-2024, 07:16 PM
          • Loading...
          • No more items.
          Working...