Vizio E390L Back light turns on and no Picture

Collapse
X
 
  • Time
  • Show
Clear All
new posts

Related Topics

Collapse

  • PNI E.
    tcl u65x9006 back light on but no picture sounf ok after 40 50 secs
    by PNI E.
    hi guys, i need your help again...i have tcl u65x9006. while i was watching it become darker like when a movie ends, little by little the image disappear. now if i turn on i have back light on, after like 1 min i have also sound but no picuture. the back light is on i take off one at time the ldvs but nothing change always no picture. i tried to cover with a piece of paper the pin of ldvs i cover like 7 8 pins but nothing worked. the tv stay with no picture. there is a tcon board.i checked the voltage there on the fuse i have 11,8 volts. there is caps in shorts on the exit of the tcon i have...
    02-20-2025, 08:36 AM
  • koby058
    vostro comes up with back light but no picture
    by koby058
    Hi people!!
    The owner said it showed bad picture once in a while (attached)
    I see that there is back light but no picture.
    I want to ask if it is possible to disable the NVIDIA GPU and use the intel one?

    Also attached schematic and BDV

    LINK to schematic & boardview - https://www.badcaps.net/forum/troubl...ll-vostro-5590...
    07-13-2025, 01:03 PM
  • sam_sam_sam
    Lift Master Garage Door wall switch display / motion sensor controller display disappeared no back light
    by sam_sam_sam
    This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors

    I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using

    I am comparing them to a brand new one that I installed

    The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well

    I going to let it run for several days before I remount back on the wall next to the...
    09-05-2024, 06:48 PM
  • ItepK
    LG 32LG3000 TV, three red light flashes, then the backlight turns on, but no picture
    by ItepK
    Hello everyone! I've found this television, and I began troubleshooting it.

    First, the television kept rapidly power cycling. I've warmed up the capacitors with a hairdryer, and after 3 dimmed red blinks, the backlight turned on, then turned dim, and no picture was present on the screen.

    I believed that this was caused by a bad power supply producing insufficent power (I've measured 3.5v on the 5.2v rail), so I've blindly recapped the board.

    After the recapping, all the voltages stableized, however, the issue in the title still remains.

    I could...
    01-03-2025, 09:01 AM
  • mrtek
    Vizio M65-C1
    by mrtek
    Hi.

    picked up another TV. This time is a Vizio M65-C1. TV does not turn on. I had repaired another 60 inch vizio , Bad main board.
    When power button is pressed, the Power led indicator on the bottom right, turns for a few seconds and then it fades away. No backlight or Vizio logo on screen. Removed back cover and repeated test.
    This is the TV This TV is a little different from the Samsung I have worked on. Power supply is on the Left side, Main Bd is on the right side, T-CON , not in the picture is on the bottom. I am assuming that the boards in the middle are the LED...
    07-14-2025, 07:28 PM
  • Loading...
  • No more items.
Working...