philips 42pfp5532d/05, error codes ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • finntricky
    Badcaps Veteran
    • Jan 2014
    • 449
    • uk

    #1

    philips 42pfp5532d/05, error codes ?

    hi guys.
    just got hold of this 42"plasma,
    pluged it in, and get standby light, this flashes twice, then goes off, then repeats,
    turned it on and got blue light for around 3 seconds and goes back to flashing red stand by, as above.
    is this a error code ?
  • finntricky
    Badcaps Veteran
    • Jan 2014
    • 449
    • uk

    #2
    Re: philips 42pfp5532d/05, error codes ?

    update, had the back off, 6 really bad caps on power supply,
    now all 6 replaced and still doing the same thing,
    disconnected the x and y and still the same, so another issue on power supply,
    time to get the meter out

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #3
      Re: philips 42pfp5532d/05, error codes ?

      I had one of these doing similar - blown fuse on power board. No shorts found, so I replaced it and it's been perfect ever since.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • finntricky
        Badcaps Veteran
        • Jan 2014
        • 449
        • uk

        #4
        Re: philips 42pfp5532d/05, error codes ?

        just had another quick look at this, just found out that 2 flashes of the red standby light indicates error on 12v rail,
        also checked va and vs, these are very bad, va = 8volts vs = 15 volts, so i think i'll give up with this one for now, as don't seem to have the time.
        as a side note, i unpluged the t-con but left everything else connected and the tv turns on with blue on light, but no volts change.
        any ideas ?

        Comment

        Related Topics

        Collapse

        • michalk3777@gmail.com
          Sharp Hisense - LC-65N7004U Error codes
          by michalk3777@gmail.com
          Hello, looking for a list of error codes for this TV. made in 2020, its manufactured by Hisense under Sharp brand. No clicks, black screen, no sound, power light is on solid. When I press power, it blinks 5 normal blinks and 1 short. and nothing happens.
          Anybody has a list of error codes that might apply to this TV? I have not opened it yet.
          Regards,...
          12-15-2024, 09:20 PM
        • Sus256
          HISENSE 65E7KQ PRO - no boot
          by Sus256
          Hi all!

          HISENSE 65E7KQ PRO
          RSAG7.820.13512 - chassis
          MT9618BAATAB - cpu
          RSAG7.820.12059 - power
          HD650Y3U77 - panel
          KLM8G1GETF - emmc

          The TV does not turn on, the standby indicator is on. All voltages are present.
          Emms is dead. Not readable, not detected.
          Replaced emmc.
          But with another dump there is no launch

          Terminal log

          UART
          <
          AC_ON
          RPMB key is not yet programmed

          HASH1_VERSION=0x00000000 64bit
          E-B
          FDE enabled
          layout pattern onebin by SAR7,0...
          06-01-2025, 02:11 AM
        • Maalobs
          Philips 60PFL8708S/12 - QFU1.2E LA - Error code 53
          by Maalobs
          Hi,

          I have a 2014 vintage Philips 60PFL8708S/12 that suddenly died in the middle of the kids watching a show.

          The relevant service manual for the chassis is available here.
          The TV no longer powers on, and leaving it powered on for a few minutes results in the layer-1 error with 2 blinks.
          When I short the SDM to ground I get the layer-2 error code 53.

          The inside of the TV has no damaged components and no swollen capacitors.
          In SDM-mode when all the power rails are left on despite entering the protection mode, I tracked down and measured...
          04-02-2019, 01:15 PM
        • mecha1166
          QN750Q8FNBFXZA Service Error Codes Needed - Error code 1-3-1-2 ? Dead set, only blinking standby light in repeating sequence
          by mecha1166
          I am working on a QN750Q8FNBFXZA. Dead except the standby light. It blinks what appears to be 1 3 1 2. 1 long blink, pause, 3 short, pause, 1 long, pause, 2 short, pause, repeat. A service manual would be very helpful, or if anyone knows these error codes. Thanks!
          03-28-2024, 08:31 AM
        • Superbee_dad
          Sharp 80” long short flash backlight error - Help
          by Superbee_dad
          Hello Sharp TV experts
          Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

          > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
          > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
          01-24-2025, 11:51 PM
        • Loading...
        • No more items.
        Working...