50" Plama vertical lines - repairable??

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Stevie B
    Member
    • Oct 2014
    • 32
    • USA
    #41
    Re: 50" Plama vertical lines - repairable??

    I heated them with a hair dryer and then I froze them with a spray.
    Now there seems to be horizontal bars in the mix.

      Comment

      • Stevie B
        Member
        • Oct 2014
        • 32
        • USA
        #42
        Re: 50" Plama vertical lines - repairable??

        These horizontal bars are not static (Vs dynamic)
        They kinda flicker about.
        They have vertical black and white lines within them.
        Attached Files

          Comment

          • freakaftr8
            Badcaps Legend
            • Oct 2012
            • 3743
            • USA
            #43
            Re: 50" Plama vertical lines - repairable??

            can you pinpoint the exact capacitor that you heated up or free sprayed to see the difference. Normally with this board I would replace all three of those 220 microfarads with standard electrolytic caps
            Did I leave the soldering iron on?

              Comment

              • Stevie B
                Member
                • Oct 2014
                • 32
                • USA
                #44
                Re: 50" Plama vertical lines - repairable??

                All three. And the other components in the area.
                The hair dryer is not selective.
                I also froze all of them.

                  Comment

                  • ademim
                    Member
                    • Dec 2014
                    • 28
                    • Portugal
                    #45
                    Re: 50" Plama vertical lines - repairable??

                    its probably the logic board or the pdp... need replacing

                      Comment

                      • Stevie B
                        Member
                        • Oct 2014
                        • 32
                        • USA
                        #46
                        Re: 50" Plama vertical lines - repairable??

                        It was the main board. I replaced it and all is good.
                        I am VERY thankful for this forum, its a great site.
                        Now I have a faulty main board that someone may want for spare parts.
                        Probably has a badcap in it

                          Comment

                          Previous 1 2 3 template Next

                          Related Topics

                          Collapse
                          • visionbluedemon
                            Help. Sony kd-65x85dj vertical lines
                            by visionbluedemon
                            First. it has no picture at all. i solved it by covering the ckv lines using tape to to block the connections

                            Second. now has picture but with vertical lines that follow the image. tcon board ic overheating

                            tried blocking LC lines too, but same results



                            is it lcd panel issue or tcon board issue?...
                            Today, 04:56 AM
                          • gpo23
                            Sony KDL-40V3000 - Vertical lines
                            by gpo23
                            Hello,

                            i order a t-con because i had bad colors on my SONY KDL-40V3000 :




                            With the new t-con the color are good but there are vertical lines on all the screen :




                            I've tried the old t-con and it returned to the initial issue (bad colors but no vertical lines)

                            Is there a way to fix the vertical lines on the new t-con ?

                            Thank you for your help

                            gpo23...
                            10-04-2023, 09:11 AM
                          • Firentiosi
                            1/3rd of screen black with occasional vertical lines - repair attempt for learning! - Kogan KALED58RT9220SVA
                            by Firentiosi
                            Thanks for offering your assistance with this. I'm an electronics enthusiast with moderate level of competence (have a decent lab with two power supplies, microscope, DSO, hot air, good iron, can competently work at a component level on SMDs, design and solder own PCBs etc). I really enjoying fixing things and learning new stuff so took up a free 58" LED TV and have been googling and watching Youtube videos to see if I can fix this! I am happy to go down to individual component replacement/strip replacement etc - it's all in the name of learning.

                            The issues are as follows: the...
                            2 Photos
                            11-27-2024, 12:33 AM
                          • viking509
                            vizio e65 e3 LED tv color vertical lines center tv only
                            by viking509
                            I recently replaced the led backlights with LB65041 LED Backlight Strips and after putting it back together the backlights work but there are only colored vertical lines only in the center of the tv. I can see the Netflix logo (jumbled) after a minute or less the screen went dark. When I turned it on again the lines were back. Then I replaced the t-con board but the same vertical lines in the picture. My question is what is my next step? Could it be a source tab bond issue? A buffer board issue? Could I have loosened a connection to the panel when replacing the backlights? Should I replace the...
                            03-21-2023, 12:48 AM
                          • rfxcasey
                            Vertical Lines on Half of LCD Display
                            by rfxcasey
                            I have an Siemens HMI with vertical lines on half of the screen. These lines aren't scrambled garbage but rather very regular in pattern and color. I have replaced the LCD with a new one and still the problem persists. I'm wondering if this isn't indicative of a bad video process chip or video memory? Any help would be appreciated. The cable appears to be OK but one pin on the header is unpopulated, though there isn't any loose wire to suggest one broke off or popped out of the connector. In the picture below where the connector is busted out of the side, I did that with my small screw driver...
                            05-16-2024, 06:52 AM
                          • Loading...
                          • No more items.
                          Working...