Announcement

Collapse
No announcement yet.

using ATX PSU for TV's?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    using ATX PSU for TV's?

    the guy i buy TV's from at the E-waste recycler told me that he has sometimes used an ATX power supply instead of the power board to diagnose TV's...

    im sure he's not lying, but is this something we can do safely?

    it makes sense to me since the average PSU for a tv only needs some 5v, 12v , and 24v which you can make just fine with an ATX PC power supply...
    then just a matter of putting the wires in the right places?

    there has to be some major reason why this is a bad idea. please, educate me!
    Don't fear the repair...
    Tags: None
    #2
    Re: using ATX PSU for TV's?

    Typical ATX PSUs output 3.3V, 5V, and 12V. Not sure how you'd get 24V, though.

    Comment

      #3
      Re: using ATX PSU for TV's?

      Originally posted by shovenose View Post
      Typical ATX PSUs output 3.3V, 5V, and 12V. Not sure how you'd get 24V, though.
      you're forgetting the negative rails....

      -12v + 12v = 24v would have thought you knew that, with how you tried to make your own PSU tester and all.
      Last edited by goontron; 10-11-2014, 08:04 PM.
      Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

      "Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

      Excuse me while i do something dangerous


      You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

      Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore

      Follow the white rabbit.

      Comment

        #4
        Re: using ATX PSU for TV's?

        Originally posted by goontron View Post
        you're forgetting the negative rails....

        -12v + 12v = 24v would have thought you knew that, with how you tried to make your own PSU tester and all.
        lol, no need to be snarky.

        I don't participate in Hardware Insights anymore, so there is no need to have a PSU tester. I thought I was going back into it but after some more thought I realized it was not my passion anymore nor a priority so I ended up not doing it. I would have done it for the money and it doesn't make sense to do something just for money especially because it's not a very good source of income. I can charge $60-120 an hour for managed services or I can spend 4 hours on a review and make a couple bucks selling the PSU afterward - which makes more sense? I still proofread some of the articles and do minor site maintenance over there but that's it.

        Now let's not derail the entire thread, ok? If you have a problem PM me, and I'd be happy to work it out, but this thread doesn't belong to us.
        Last edited by shovenose; 10-11-2014, 08:16 PM.

        Comment

          #5
          Re: using ATX PSU for TV's?

          Since the -12V and the +12V of the ATX will have common gorund, then for you to make 24V with negative ref to ground for the inverter board, then you will need to lift the ground of the -12V and the +12V ground. The 24V will also have to be rated at about 4~5A for typical inverter board.
          I am sure you have some TV that is beyond fixing, then you can use the power supply from it for testing.
          Last edited by budm; 10-11-2014, 08:23 PM.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

            #6
            Re: using ATX PSU for TV's?

            yes that probably is the easiest solution...save a working PSU (the more "normal" the better?) from a tv with a broken screen and use that...
            as long as you rewire it correctly, there shouldnt be any danger to the main board?
            Don't fear the repair...

            Comment

              #7
              Re: using ATX PSU for TV's?

              Samsung power supplies are pretty awesome for the fact you can take a ps from one TV and if the mainboard plugs match you can use it to power on another panel.

              I have done this with a few LCD PS for some Sammy plasmas to trouble shoot mainboard on/off voltages

              Comment

                #8
                Re: using ATX PSU for TV's?

                Also the -12v rail won't supply very much current.

                Comment

                  #9
                  Re: using ATX PSU for TV's?

                  Originally posted by SteveNielsen View Post
                  Also the -12v rail won't supply very much current.
                  Yeah, usually less than 1 Amp. Most seem to use just an LM7912.
                  "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                  -David VanHorn

                  Comment

                    #10
                    Re: using ATX PSU for TV's?

                    Yes. I was gonna say that. Most PSUs have around 0.5A to 0.8A capacity - not really useful.
                    I love putting bad caps and flat batteries in fire and watching them explode!!

                    No wonder it doesn't work! You installed the jumper wires backwards

                    Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

                    Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

                    Comment

                    Previous template Next
                    Working...
                    X