Hello, I recently saved a Samsung from the junkyard. The picture is polarized in strange colors. There is a horrible ghosting effect between screens that does eventually go away. I posted pictures of the Test pattern screens. the Logic Test Patterns did not work at all. The TV did nothing but show static with the OSD showing the number of which pattern should have appeared.
I do not have a DMM at my disposal until tomorrow to test the t-con board but I figured Ide get the ball rolling with pictures to get some general suggestions from you guys.
I searched around and saw a lot of posts that pointed to the one chip on the t-con board but I did not see a lot of posts on the ghosting issue.
Thank you guys!
-JT
I do not have a DMM at my disposal until tomorrow to test the t-con board but I figured Ide get the ball rolling with pictures to get some general suggestions from you guys.
I searched around and saw a lot of posts that pointed to the one chip on the t-con board but I did not see a lot of posts on the ghosting issue.
Thank you guys!
-JT
Comment