Re: STARTIME DVR scanning Frequency and symbol rate needed.
frequency 3741, SR FEC 10114. If i get it right i clicked on startimes tv guide
ERICSSON89
Member
Last Activity: 11-17-2016, 12:48 PM
Joined: 10-18-2014
Location: EDO STATE
-
Re: STARTIME DVR scanning Frequency and symbol rate needed.
and what is the symbol rateLeave a comment:
-
Re: STARTIME DVR scanning Frequency and symbol rate needed.
yes exactly this one. 10.0E Eutelsat 10A Startimes TVLeave a comment:
-
hi tom, please can you direct me to that your thread on how plasma display panel (PDP) Set work? -
Re: Vizio e421vo - Has Picture but NO SOUND
also we need clear pictures of the mainboardLeave a comment:
-
Re: Vizio e421vo - Has Picture but NO SOUND
check the ear-phone jack on the main board by plugging in earphone peice to see if you can hear the sound from it.Leave a comment:
-
STARTIME DVR scanning Frequency and symbol rate needed.
Please can anyone help me with the frequency and symbol rate for scanning STARTIME DVR DECODER? I would so much apreciate if anyone here help me.
Thanks -
Re: Smps design
OK thanks for the link.Leave a comment:
-
Smps design
Please I'm trying to build a SMPS Unit and can anyone help me STEP-BY-STEP on how to find the value of components when designing the power supply board? Example like DVD PLAYER POWER SUPPLY/SMALL POWER SUPPLY ADAPTER.
I am currently a student studying ELECTRICAL ELECTRONICS ENGINEERING and I always like to put on some effort and learn things.
l hope anyone who know how to may help.
Thanks
ERIC -
Re: E552VL 0500-0507-0790 Clicking.
please I need the SCH to this same SMPS board.
thanks
ERICLeave a comment:
-
Re: Phillips 50pfp5332d/37--BlownUP Buffer Chip!! NO PICTURE ON SCREEN!
I just don't understand you exactly, how many buffer in your panel? One buffer or upper/lower combination?Leave a comment:
-
Re: Vizio VP50HDTV10A; replaced caps and still intermittently shut off and cycles on/
try heating components with hot air gun and spray some freeze coolant on PSU board to see if it will work fine.Leave a comment:
-
Re: Panasonic tcp50gt30 7 blinks, help with SU/SD test
please upload photos of the chassis with the back cover over and also separate photo of the SC, SU/SD BOARD. remember good clear pictures are needed.
ERICLeave a comment:
-
Re: LN46A750R1FXZA Samsung vertical lines
maybe u can try as keeney123 suggested in post #11. that's is a first suspect starting from the LVDS cable btw main and TCON, ribbons btw TCON and panel.Leave a comment:
-
Re: LG 50PX4D-EB picture problem
COF DRIVE( C drive) I thinkLeave a comment:
-
Re: Samsung 223BW 2 sec to black.
I hate XPERIA mobile not even smart. the primary winding will show a low resistance 1.3ohm, secondary will a resistance around 970ohm. in the 2kohm range.Leave a comment:
-
Re: LG 50PG20 plasma no power issue
PSU BOARD is power supply board so u need to upload pictures.Leave a comment:
-
Re: LG 50PG20 plasma no power issue
tom is the man so do exactly as he instructed.Leave a comment:
-
Re: CAN ANYBODY HELP ME WITH LED LCD TRAINING MANUAL? if any please
Thanks for the link tom66.Leave a comment:
-
Re: CAN ANYBODY HELP ME WITH LED LCD TRAINING MANUAL? if any please
please can u help me with the link?Leave a comment:
No activity results to display
Leave a comment: