Badcaps - what do you think - un46b6000vf samsung

[zdsh07p9]

I have the opportunity to buy this TV for a decent amount. What do you think could be wrong with it? Pic Below

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

+ Budm I checked the guides you gave me the other day and couldn't specify which category this would go in from the examples

[tom66]

Re: Badcaps - what do you think - un46b6000vf samsung

it is a bad panel, stay away.

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

Thank you - I will steer clear of this one

[Shinju]

Re: Badcaps - what do you think - un46b6000vf samsung

Well wait. If you can get it for cheap/free get it for parts. These are common panels and parts are not cheap to buy if you come across one that has a bad not repairable PCB in it.

Just my 2 cents.

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

I wish I could get it for free. I talked this guy down from $250 (INSANE) to $50 but if it has a bad panel then I don't think I could do $50 for it because the parts aren't too bad (compared to some others Ive bought)

[Shinju]

Re: Badcaps - what do you think - un46b6000vf samsung

250! Oh wow the seller is delusional! Yeah I would run 50 is meh if you don't do high volume repairs.

[DemonBG]

Re: Badcaps - what do you think - un46b6000vf samsung

This one MAY be a bad main board as well - I had a similar (not exactly the same) issue on a C series TV which turned out to be a faulty main board:

https://www.badcaps.net/forum/showthread.php?t=37133


Good luck,
Demon

[Shinju]

Re: Badcaps - what do you think - un46b6000vf samsung

^ I think your display error is different, did your lines bleed down or were they solid as soon as you turned on the Panel?

I had this Panel in the 7000 series and mine did exactly what the op's panel is doing

https://www.badcaps.net/forum/showthread.php?t=38822

Yours looks like the one I have here now its a 55C650 that fell off a wall mount and ripped the Coaxial input right off the board and damaged the LVDS connector output on the main board.

When I fired this one up it worked fine but had every other pixel rainbow line and after 5-10 min of use it would go away I thought it was a bad panel and was about to toss it / part it when I discovered the LVDS connector being loose. I applied pressure while it was on and the lines went and came when I released pressure.

Trying to find a mainboard for it now but there is nothing for sale for it anywhere!

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

He was extremely delusional, I think ill tell him that if he will come down to $20 Ill come pick it up tonight and check it out. But its really difficult for me to sink anymore into it. So would you pick it up for $20 as a low quantity repair person?

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

btw - I found a main board on ebay but its $129.99 OBO

[Shinju]

Re: Badcaps - what do you think - un46b6000vf samsung

He was extremely delusional, I think ill tell him that if he will come down to $20 Ill come pick it up tonight and check it out. But its really difficult for me to sink anymore into it. So would you pick it up for $20 as a low quantity repair person?

I would take it for 20.00. If the mainboard tests out good that's an easy 90-100.

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

More pictures if they help

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

Very true, The power board must be good still - im guessing.

[Shinju]

Re: Badcaps - what do you think - un46b6000vf samsung

I am 90% certain its a bad panel, if you get it break it down to the tab bonds and apply pressure to the TFT board or gently to the IC bonded inside the ribbon cables and see if it changes. (There is quite a few tab bonded ribbon cables that are fused to the glass/TFT buffer board)
Use a piece of rubber or something nonconductive, the one I had I ended up parting it out to a local who needed parts for his with a good panel.

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

the TFT board is the boards that connect to the LCD via the tab bonds? or are those the IC drivers

[Shinju]

Re: Badcaps - what do you think - un46b6000vf samsung

^ yes there should be a TFT board for left and right after the T-con. Let me see if I cannot dig up a photo of the 7000 I had.

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

Oh okay, I know what youre talking about now, I just had an e601i-a3 that had a vertical blue thin line on it that I tried that with. BTW if anyone needs parts to e601i-a3 I have 2 working main boards, 2 working t cons, and a power supply + remote control for it haha.

[Shinju]

Re: Badcaps - what do you think - un46b6000vf samsung

Sorry for the blurry photo the iPhone decided to focus on the screen more then the tabs.

[zdsh07p9]

Re: Badcaps - what do you think - un46b6000vf samsung

Ahh no problem. I see them though, Thanks for all your help. I will need more soon im guessing !