LG 42LN5300 - Lightning Strike Victim

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BriSpe
    New Member
    • Sep 2014
    • 4
    • United States

    #1

    LG 42LN5300 - Lightning Strike Victim

    My new LG TV, which I purchased to replace my Vizio with no sound just over a month ago, recently took a crap from what was most likely a lightning strike (along with my DirectTV box, modem, garage door opener, and ice maker). Since the DirectTV box also was fried, could it have messed up the TV via the HDMI cable? When I plug the TV in and turn it on, the screen has an irregular strobe/flash going on with random horizontal white lines flashing. There is no picture, just black screen with white lines and flashing back-lighting. Once on, it does this until I unplug it (won't stop with power button). Between this and my Vizio, this is my first time messing with TVs. Should I just buy a new main board? Could any other boards be bad? I checked the fuse on the power board and it was still good. I also checked the voltages going out of the power board and they seemed OK too. Any ideas on what to check first?

    Thanks,
    Brian
  • BriSpe
    New Member
    • Sep 2014
    • 4
    • United States

    #2
    Re: LG 42LN5300 - Lightning Strike Victim

    Found a main board for cheap and swapped it. Works perfect now.

    Comment

    Related Topics

    Collapse

    • Bardou Kari
      HP EliteBook 840 G6 – no power after lightning strike
      by Bardou Kari
      Hi,
      I’m trying to fix an HP EliteBook 840 G6 that stopped working after a lightning storm.

      – Charger is OK and 19V is present at the motherboard.
      – No charging LED, no fan, no reaction.
      – I don’t see any 3.3V or 5V near the coils.
      – Battery is unplugged.
      – I’m new to board repair but can use a multimeter.

      I added a clear photo of the board.
      Any idea where to start or what to check next?
      Thanks a lot for your help!...
      07-01-2025, 10:45 AM
    • SluggerB
      Panasonic TH-50PX80 killed by lightning strike, help me save her!
      by SluggerB
      Yes it's a 17 year old Panasonic plasma!

      I was watching TV when there was a huge lighting strike nearby my house that shook the house. When that happened, the picture on the TV froze and the TV wouldn't turn off except by pulling the power cable. Now if you plug in the TV, it seems to turn on (it makes the turn on "clikcs" it always does, the red power light comes on but there is no picture, although I can see the back light around the edges. And the TV doesn't respond to the power button on the remote to turn off, and doesn't respond to the manual power button on the front...
      06-04-2025, 07:02 PM
    • karthur
      Samsung UN60EH6000 wont come on after lightning strike.
      by karthur
      We had a lightning strike a few days ago really close to my house. My Samsung UN60EH6000 was on when it hit. Afterwards, the TV would not come back on.

      I had repaired this TV a few years back by replacing the T-Con board. (The post I had on this is repair is here.)

      When I turn on the TV, I don't get any start-up melody. The screen just dimly flickers around the edges.

      Here is what I have checked.
      On the power supply board, 14pin connector:
      1 :12.7 Vdc
      3 :12.7
      5 :12.7
      7 :12.7
      9 :0
      11 :5.
      13 :5....
      11-01-2023, 06:18 PM
    • MrCreosote
      Lightning Strike: 55" TV dead: is display panel OK?
      by MrCreosote
      THE LIGHTNING:
      This was a very close strike, blew a 15 amp breaker for all ceiling lights in home AND could smell ozone for a few minutes after strike.

      Very close and probably a very strong EMP.

      THE TV:
      No standby LED. Some voltage from PSB (not totally dead).

      But found a kit of ALL 4 circuit boards for $55.

      At first thought, this will fix my TV.

      But then lightning has the ability to totally fry semiconductors. Which would include any or all of the PCBs. However, the display is one big semiconductor and given...
      08-16-2021, 10:27 PM
    • pbig
      advices for repairing Sony Bravia 32EX600 after lightning strike
      by pbig
      hi everyone,
      my parents in law have seen their Bravia Sony LED 32EX600 TV set stop after a lightning strike. After being plugged to mains, it shows nothing no power LED on bottom left shines.
      On the power PCB (GE3b, attached pic), I chacked the fuses and the only roasted one is R6536 : 0.47 ohms, 1/2W. After replacing it, I made some voltage measurement with ref to the chassis :
      - the 450V/150uF capacitor voltage when plugged is normal at 394V
      - from connector CN6150 (15 poles)
      STBY normal 3.3V -> I shunted it to 3 (POWER ON) and 11 (BL ON) and unplugged...
      06-28-2023, 02:43 AM
    • Loading...
    • No more items.
    Working...