PQ file necessary-VES500QNDP-N2-U11

[ivtv1]

Brand: Polaroid
Model: P50UPA2029A
Chassis: 17MB130S
PSU:17IPS72
Matrix/Panel: VES500QNDP-N2-U11

PQ file is required. After updating via USB, the TV starts up but the panel is not correct. Please provide the PQ file for recovery.

[yokoono]

Type MENU 4725 and put the resulting picture here.

Save the panel profile from the TV and post it here.
1. Format a stick with FAT32
2. Create a folder called downloadpq.mb130 on the stick
3. Turn on the TV and type MENU 4725
4. Go to USB Options and type OK on the remote control
5. After 10 seconds you can remove the USB stick and you will have some files on the stick.
6. You post them here.

[ivtv1]

HI
I downloaded the PQ profile. I can't attach it here. The extension is .bin. What is the way?
I am using Vestel panel editor. I have uploaded all the edits sequentially. I am not successful.

[yokoono]

In Upload Attachaments

[ivtv1]

I am getting this message.

[ivtv1]

This is the link.

[yokoono]

Archive the downloadpq.mb130 folder with an archiver (winrar, winzip) and attach it to the site.

[ivtv1]

Here you go.

[yokoono]

Try. 8 bits VESA

1. Format a stick with FAT32
2. Create a folder called pq on the stick
3. Unzip and put the 2 files in the folder
4. Turn on the TV, USB stick and type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu (return, back)
7. Turn off the TV from the remote control
8. Wait until the stby LED on the TV stops flashing
9. Unplug the TV and wait until the stby light goes out.
10. Take out the stick and turn on the TV.
If the image is not correct, repeat the operation

[ivtv1]

Thanks for the file,
I am a TV technician and I know the procedures. I have done many modifications, all without success. I need the PQ file for this particular panel. I find many files on the world wide web, but they do not match. I need this one. I got the image change, but it is not the correct one.

[yokoono]

I not panel profile saved for this panel.
Try 10 bits JEIDA

[yokoono]

Try 10 bits VESA

[ivtv1]

Thanks, this one is not suitable either. I have to wait for another TV with such a panel and clone it.

[yokoono]

Unfortunately, I don't have a panel profile or full software for 17MB130S and VES500QNDP-N2-U11 panel in my archive. If you find one, I'm interested.

[ivtv1]

Okay, as soon as I find it, I'll post it.