ivtv1
Member
Last Activity: Yesterday, 10:04 AM
Joined: 10-24-2016
Location: Sofia
-
Yes. R-713 on the t-cont is moved to the other position. -
The solution has been found. T-cont passes from VESA to JEIDALeave a comment:
-
If there is a short circuit in any of the outputs of the power supply, it will not start. With a multimeter, check for a short circuit to ground.Leave a comment:
-
Have you measured all the outlets for leaks with a multimeter?Leave a comment:
-
HITACHI 32HAE4351-firmware
Hello,
I need software for this TV.
Main board-17MB171
Power supply 17MB62
Panel- VES315UNGB-L3-N52 .
I updated with a file for the VES315UNGH-L3-N41 panel and the TV worked, but the image is incorrect. Please provide a file for the exact panel. The update is via USB. -
Okay, as soon as I find it, I'll post it.Leave a comment:
-
Thanks, this one is not suitable either. I have to wait for another TV with such a panel and clone it.Leave a comment:
-
Thanks for the file,
I am a TV technician and I know the procedures. I have done many modifications, all without success. I need the PQ file for this particular panel. I find many files on the world wide web, but they do not match. I need this one. I got the image change, but it is not the correct one....Leave a comment:
-
Here you go....Leave a comment:
-
Leave a comment:
-
I am getting this message....
Leave a comment:
-
HI
I downloaded the PQ profile. I can't attach it here. The extension is .bin. What is the way?
I am using Vestel panel editor. I have uploaded all the edits sequentially. I am not successful....Leave a comment:
-
PQ file necessary-VES500QNDP-N2-U11
Brand: Polaroid
Model: P50UPA2029A
Chassis: 17MB130S
PSU:17IPS72
Matrix/Panel: VES500QNDP-N2-U11
PQ file is required. After updating via USB, the TV starts up but the panel is not correct. Please provide the PQ file for recovery. -
These pins are always at the end of the tape.
https://www.youtube.com/shorts/3jD2pe_qUEELeave a comment:
No activity results to display
Leave a comment: