JVC-32C675 Backlights on but blank screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 4thommo
    New Member
    • Nov 2014
    • 6
    • united kingdom
    #1

    JVC-32C675 Backlights on but blank screen

    Hi all,i have this problem and so far I have visually checked the main board and flashed the main board with the files in the first picture. The flash seemed to go ok,first the front red LED flashed quickly and then slowed up before the TV turned itself off and on but it is still the same. I see there are exact matching main boards available but I don't want to commit to that incase it's something else. Any help would be greatly appreciated.
    PSU 17IPS62
    MB 17MB110P
    Panel VES315WNDS-2D-N14
    4 Photos
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12187
      • U.S.
      #2
      Can you post good straight on focused pictures of each whole board and one of the whole back as to see how everything is connected.

        Comment

        • 4thommo
          New Member
          • Nov 2014
          • 6
          • united kingdom
          #3
          Originally posted by nomoresonys
          Can you post good straight on focused pictures of each whole board and one of the whole back as to see how everything is connected.
          Thanks for replying, hopefully these are good enough
          3 Photos

            Comment

            • nomoresonys
              Badcaps Legend
              • Jan 2013
              • 12187
              • U.S.
              #4
              Ok, I thought it was a vestel from the description in first post, to me it seems like a mainboard issue but honestly I very seldom even see vestel tvs here. Best to let the vestel guys help, wish I knew more about them.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Chrissygizmo
                  Panasonic TX-48CX350B backlights but white screen , blank screen
                  by Chrissygizmo
                  Hi all, I’ve got a problem I hope someone can help me fixi.
                  I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...
                  01-11-2025, 03:18 PM
                • mecha1166
                  KDL-60EX500. Comes on fine, sound is fine, backlights come on. Blank screen.
                  by mecha1166
                  KDL-60EX500. Comes on fine, sound is fine, backlights come on. Blank screen. Already tried reset POWER/VOL-. Anyone else have this problem? Possibly bad T-Con RUNTK4244ZZ or panel? Could main or power supply cause this? There were 2 blown 560u 35v on power going to backlights but they were still working fine. Thanks for your help.
                  11-25-2024, 05:22 PM
                • dicky96
                  HP Elitebook Screen blank - backlights but no image
                  by dicky96
                  Hi guys
                  I'm trying to fix this laptop screen

                  Basically the owner is a computer shop and they brought it to me with two screens. They said the repair shop they use could not fix it, so I thought i would try to see if I am better than their current repairer!

                  OK so I have the original screen which works but has lines across the bottom quarter of the screen

                  I have the replacement screen, which they fitted and it worked. They then put the laptop on one side for a couple of weeks until they found a buyer. When they showed it to the buyer, the screen would...
                  04-28-2021, 07:30 AM
                • Ryan.man
                  Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                  by Ryan.man
                  Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                  My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                  This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                  02-04-2025, 12:23 PM
                • reformatt
                  Macbook Air M2 A2681 Kernel panics after screen replacement
                  by reformatt
                  Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                  It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                  07-31-2025, 08:37 PM
                • Loading...
                • No more items.
                Working...