e-motion TV/DVD: No Sigal

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • speedypro
    Badcaps Veteran
    • Feb 2013
    • 561
    • United Kingdom
    #1

    e-motion TV/DVD: No Sigal

    Got this dvd tv combo that only shows no signal. We've replaced the montherboard but same issue sometimes. The board we bought could suffer from same issue...who knows?

    Anyone know what could cause a "no signal" message when on the dvd menu? DVD drive has not been changed.
    Full-time computer repair tech (10am - 6pm) and full-time, (8am - 11pm), Ruby on Rails Developer
    Tags: None
    • RJARRRPCGP
      Badcaps Legend
      • Jul 2004
      • 6304
      • USA
      #2
      Re: e-motion TV/DVD: No Sigal

      Originally posted by speedypro
      Got this dvd tv combo that only shows no signal. We've replaced the montherboard but same issue sometimes. The board we bought could suffer from same issue...who knows?

      Anyone know what could cause a "no signal" message when on the dvd menu? DVD drive has not been changed.
      It's probably the main board, if there's not a separate input board.
      ASRock B550 PG Velocita

      Ryzen 9 "Vermeer" 5900X

      32 GB G.Skill RipJaws V F4-3200C16D-32GVR

      Arc A770 16 GB

      eVGA Supernova G3 750W

      Western Digital Black SN850 1TB NVMe SSD

      Alienware AW3423DWF OLED




      "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

      "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

      "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

      "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: e-motion TV/DVD: No Sigal

          A lot of these DVD player combis output a standard analog video signal to the main board. If that is not present, it can cause issues like a No Signal display.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • stj
              Great Sage 齊天大聖
              • Dec 2009
              • 31003
              • Albion
              #4
              Re: e-motion TV/DVD: No Sigal

              is it on the right band?
              it may have a miss-configured hyperband tuner

                Comment

                Previous template Next

                Related Topics

                Collapse
                • AstutePauciloquent
                  Requesting Help For GA-970A-DS3 rev. 1.0, No Post code, no RSMRST# signal
                  by AstutePauciloquent
                  Hi everyone, over the past few months i have taken a deep dive into motherboard diagnostics and I love the challenge. Currently im trying to learn all about the signals that travel around the motherboard, such as frequencies, enable signals High and Low logic states etc. And i have been learning to read and using the Schematics for this board that i requested here on Badcaps forum, from a few months ago, this is such a great place for these.

                  I’ve been working on a GA-970A-DS3 (rev. 1.0) that does not post. This motherboard has been my main learning board. I would like share...
                  11-23-2023, 11:02 PM
                • howardc64
                  Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
                  by howardc64
                  Failure Symptom



                  No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

                  Where is the short?

                  Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



                  Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
                  05-27-2025, 02:56 PM
                • JayPoorJay
                  Converting +/- 5v to a Usable Hz Signal
                  by JayPoorJay
                  Good morning.

                  I have posted here before and have gotten AMAZING advise (thank you!). I'm back for more. This BCaps Sub Forum is so well attended I thought I would post here.

                  This question is for an automotive application but has to do with what are essentially electrical questions and problem solving... If this is inappropriate I get it. Feel free to delete it or move the question.

                  The V 12 Jaguar XJS is notorious for overheating in stop and go traffic in hot weather... Y'all will be potentially helpinh a LOT of people. The solutions and directions...
                  08-07-2022, 08:35 AM
                • Scruit
                  What is a normal composite signal range for a C64?
                  by Scruit
                  Hello all,


                  Working on my first C64 / Breadbin / 250407. Purchased as non-working. Getting black screen.


                  More detail below, but for those that want to get right to the question.... Here are a few waveforms comparing the Pin15 output on the VIC chip (luma/sync) to the pin 4 on the AV socket (composite signal).

                  https://imgur.com/gallery/PpqcqPY


                  My question is: Is the composite waveform range of 0.1v-1v too low for a c64?



                  More detail:


                  Symptoms are that that I get...
                  04-28-2022, 05:33 AM
                • supravit2000
                  PS4 fat has inconsistent signal after HDMI replacement
                  by supravit2000
                  Hi, guys!

                  I am not a professional, all I can do is solder stuff on the boards, so I would really appreciate it if someone with knowledge shares his experience/thoughts on a problem I have with a PS4 console.

                  My friend gave me an original fat PS4, board model SAB-001, with WLOD, that has been previously opened. I changed the HDMI port, couple of pads on the board were ripped, which I connected to the corresponding caps/resistors? Just did so as in a shown diagram (one of the ground pads I ripped off and left it not connected). However, there was still no signal, so...
                  12-19-2022, 08:08 PM
                • Loading...
                • No more items.
                Working...