Hi there guys, my samsung is giving me problems with vertical lines right in the midle of the screen, and it covers both sides. It's not the entire screen it's probably 30%, but it's like 20% one side, 10% the other side.
I've opened the panel, try to power it on to see if there was a problem with the ribbon cables on the T-com, but no result... But i noticed a "click" sound when i tuned it on on the power supply. TV takes some seconds now to turn on, and it keeps making the noise, then when on, this "click" stops, and the TV has this vertical lines. The click sound will be back when i turn off the TV.
So i took the power supply of the TV, turned it on alone(only the power suply conected) and that "click" sound never stops. I don't know exacly where it comes from, so i removed the capacitors that where closer to the sound to test, and they all charged and discharged ok with the multimeter, and i turned the TV on(without the capacitors) to see what it does without them and immediately blew up a chip.
I don't know what this chip is or if it was causing the problem, but it blew up. I turned the board on again with the capacitors on the board now, and it doesn't do any sound now.
How can i know what that was? Board is a PSLF171B01B, and the chips has written ICB801
Here is a pic of the board and what IC blew up.
It like ripped the top off, i have like half of the IC, but it doesn't help very much i guess... It has 3 lines. I can read:
BR0665J
G0916
7167C4
Can someone help?
I've opened the panel, try to power it on to see if there was a problem with the ribbon cables on the T-com, but no result... But i noticed a "click" sound when i tuned it on on the power supply. TV takes some seconds now to turn on, and it keeps making the noise, then when on, this "click" stops, and the TV has this vertical lines. The click sound will be back when i turn off the TV.
So i took the power supply of the TV, turned it on alone(only the power suply conected) and that "click" sound never stops. I don't know exacly where it comes from, so i removed the capacitors that where closer to the sound to test, and they all charged and discharged ok with the multimeter, and i turned the TV on(without the capacitors) to see what it does without them and immediately blew up a chip.
I don't know what this chip is or if it was causing the problem, but it blew up. I turned the board on again with the capacitors on the board now, and it doesn't do any sound now.
How can i know what that was? Board is a PSLF171B01B, and the chips has written ICB801
Here is a pic of the board and what IC blew up.
It like ripped the top off, i have like half of the IC, but it doesn't help very much i guess... It has 3 lines. I can read:
BR0665J
G0916
7167C4
Can someone help?
Comment