Ok friend gave me a Polaroid FLM-373B to look at.
He had the typical bad caps on power board and replaced them.
he then unplugged it to blow dust off of it.
After doing so he plugged it back in and there was no problem what so ever.
When I looked at it this is how I get it to come on.
I gently plug the AC power cord in the back of the tv till I hear a small spark. then the red light comes on then i push power cord all the way in and the tv works no problem.
If you just plug the power cord in no red light, but if you gently push in until you hear that little spark the red light will come on.
I am thinking it is the part the power cord plugs into that is bad.
What do you think
I have never seen this before
He had the typical bad caps on power board and replaced them.
he then unplugged it to blow dust off of it.
After doing so he plugged it back in and there was no problem what so ever.
When I looked at it this is how I get it to come on.
I gently plug the AC power cord in the back of the tv till I hear a small spark. then the red light comes on then i push power cord all the way in and the tv works no problem.
If you just plug the power cord in no red light, but if you gently push in until you hear that little spark the red light will come on.
I am thinking it is the part the power cord plugs into that is bad.
What do you think
I have never seen this before
Comment