I have these 2 tv's the look different but internally they are almost identical.
Both share power supply BN44-00167A
Have the same t-con 4046HDCM4LV0.1
And the same inverter SSB400WA16V
Both also share the same panel. LTA400WT-L06
So one of the tv's has a mainboard problem that I can't figure out and the other one has a backlight problem caused by the bulbs. I can get it to work but need to remove 3 of the transformers and jump them for it to go on.
So I thought I'd change the mainboard from the one with bad bulbs and replace out in the one with the faulty mainboard.
Tv powered up and was working fine for about an hour then the picture froze, clicked off then back on and now doesnt find the arial signal.
Tried HD ports and it says it's not supported?
Any idea why this would be? Doesn't make sense... Surely if you ordered a replacement panel it would be like doing the same board swap.
I've tried factory reset no joy.
Both share power supply BN44-00167A
Have the same t-con 4046HDCM4LV0.1
And the same inverter SSB400WA16V
Both also share the same panel. LTA400WT-L06
So one of the tv's has a mainboard problem that I can't figure out and the other one has a backlight problem caused by the bulbs. I can get it to work but need to remove 3 of the transformers and jump them for it to go on.
So I thought I'd change the mainboard from the one with bad bulbs and replace out in the one with the faulty mainboard.
Tv powered up and was working fine for about an hour then the picture froze, clicked off then back on and now doesnt find the arial signal.
Tried HD ports and it says it's not supported?
Any idea why this would be? Doesn't make sense... Surely if you ordered a replacement panel it would be like doing the same board swap.
I've tried factory reset no joy.
Comment