Sony kd-85x85j LED blinking red 6 times

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NolesFan
    trying to learn
    • Jul 2024
    • 94
    • United States

    #41
    Well it was the LEDs. Found replacements swapped em out and the TV did work. I said did because when I was setting the panel back in place, I needed to shift it ever so slightly and it cracked Im so freaking mad at myself for not getting help ugh.

    IF I wanted to look into a panel replacement cost ( i know typically expensive ) where would I look? I googled it but havent found much luck. Thanks.

    Comment

    Related Topics

    Collapse

    • SevenOFF
      Denon AVR-X4000 – Fast red blinking after 2nd relay
      by SevenOFF
      Hi everyone,

      I’m working on a Denon AVR-X4000 that goes into protection mode (fast red blinking LED) shortly after the second relay click.

      According to the service manual, a fast red blinking LED indicates a DC detection (DC_DET) or ASO (abnormal current) fault, meaning the unit is detecting a potentially dangerous condition on the power amp or power supply side.

      Here’s what I’ve done so far:
      • Fully opened and cleaned the unit (a lot of dust inside)
      • Removed and visually inspected the AMP board → nothing visibly damaged or burned
      • Testing is done with
      ...
      06-18-2025, 09:54 PM
    • YasaCh
      Sony kdl 40p5500 red light keeps blinking 3 times
      by YasaCh
      Hello...
      my tv almost 2 years not powerd on and when i turned it on nothing happened and only 3 red light keeps blinking
      i opened the back cover no sign of damage on the powery suply or motherboard
      when i plug in the power i hear the reley sound like tik first and another tik..after that only red keep blinking..
      another thing is even after i unplugged the power, The tv keeps red blinking 3 times for 2 almost 2 munites
      07-07-2025, 11:53 AM
    • matwan
      Sony XR-55X90J 5 blinks
      by matwan
      Hello,

      I have problem with SONY 55X90J. After several check status is as below;
      1. Running power board as stand alone:

      TCON_12V =~ 12.6V
      EVDD V On Max 24V= 19V.

      2.
      Running power board with TCON as stand alone:

      Effect as below, attched.

      3. When bottom LVDS cable is disconnected no blinks, but of course no TCON 12V and EVDD.
      "I'm almost sure it's a defective panel, but maybe someone has encountered a similar issue on their screen.

      Best regards....
      09-28-2025, 04:26 AM
    • GoodCapDude
      Sony XBR-75X940E intermittent 6 blinks error code
      by GoodCapDude
      Hi everyone. First post on Badcaps!

      I am trying to fix a Sony 940E from 2017 that either starts normally (and works perfectly until turned off) or goes straight to the 6 blinks error code without showing anything on the screen. It is frustrating to know that it can still work perfectly but is barely usable because of the difficulty starting it up. I am willing to try to short the BL_ERR but I would like to avoid that if possible. Does anyone have a view on this? Thanks a lot....
      09-20-2025, 06:07 AM
    • shahnld
      Sony kdl 65xg9505 green amber blinking
      by shahnld
      Good Day.

      I just replaced tcon on my sony kdl 65xg9505 and getting green amber leds blinking. all voltages are ok according to working sequence.

      i downloaded firmware from sony and there is no .pkg fike.. after extracting it gives another file which contains multiple files like inf, payload.bin and 3, 4 other files. i just did that usb but did not worked. anyone knows anything how to do it..?

      green amber blinking stops after while and then starts again. tv responds to remote control on off etc. before installing new tcon backlite was coming on without backlite...
      01-03-2024, 03:05 PM
    • Loading...
    • No more items.
    Working...