Universal T-Con Board..?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SlickClick
    Senior Member
    • May 2011
    • 91

    #1

    Universal T-Con Board..?

    Has anyone had any experience with these yet..?

    http://www.fixyourdlp.com/2013/04/26...l-t-con-board/
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Universal T-Con Board..?

    As universal as working in certain TV's using sharp panels...
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago

      #3
      Re: Universal T-Con Board..?

      OK so what yhey are saying is that all T-Con boards are wired the same way. i.e: All panels are wiredsimilarly??

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Universal T-Con Board..?

        Almost all panels are differently driven and wired, there is no such thing as a universal T-con board.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • SlickClick
          Senior Member
          • May 2011
          • 91

          #5
          Re: Universal T-Con Board..?

          I want to say that the input wire to/from the T-con that carries the LVDS signal is a universal standard as far as that wire goes...

          The question is the 2 output ribbons to the panel to line up to this one; and I want to say that it would only work for panels with 1080p...

          or as Tom said maybe its only applicable to Sharp panels; but this is why I threw the question out here because I wonder if anyone has come across this board and tried it on various other models or older CCFL driven panels...
          I think I might have one in a 46 inch sanyo that has a broken sharp panel in it...

          Comment

          • R_J
            Badcaps Legend
            • Jun 2012
            • 9535
            • Canada

            #6
            Re: Universal T-Con Board..?

            It is not a "universal" t-con, it is just common to a panel used in some 60" sets.

            What about this one, is it also a universal t-con?:
            CMO 35-D003848 T-Con Board (V320B1-L01-C)
            Its used in more makes and models, just check shopjimmy.
            LVDS signal may be a standard but they can use any pins on any type of plug they want.
            Last edited by R_J; 06-08-2014, 04:34 PM.

            Comment

            Related Topics

            Collapse

            • advant
              Driving a Sharp TCON/panel with a universal main board
              by advant
              This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

              I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
              02-03-2020, 12:25 AM
            • Hakuu
              LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
              by Hakuu
              Hi There,

              This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

              After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

              More Details

              TV Model - LG OLED77G1PUA

              Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
              07-12-2023, 02:37 PM
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • howardc64
              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
              by howardc64
              Problem

              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
              08-04-2024, 10:36 PM
            • Loading...
            • No more items.
            Working...