Universal T-Con Board..?

[SlickClick]

Has anyone had any experience with these yet..?

http://www.fixyourdlp.com/2013/04/26...l-t-con-board/

[tom66]

Re: Universal T-Con Board..?

As universal as working in certain TV's using sharp panels...

[Andrew F. Ali]

Re: Universal T-Con Board..?

OK so what yhey are saying is that all T-Con boards are wired the same way. i.e: All panels are wiredsimilarly??

[tom66]

Re: Universal T-Con Board..?

Almost all panels are differently driven and wired, there is no such thing as a universal T-con board.

[SlickClick]

Re: Universal T-Con Board..?

I want to say that the input wire to/from the T-con that carries the LVDS signal is a universal standard as far as that wire goes...

The question is the 2 output ribbons to the panel to line up to this one; and I want to say that it would only work for panels with 1080p...

or as Tom said maybe its only applicable to Sharp panels; but this is why I threw the question out here because I wonder if anyone has come across this board and tried it on various other models or older CCFL driven panels...
I think I might have one in a 46 inch sanyo that has a broken sharp panel in it...

[R_J]

Re: Universal T-Con Board..?

It is not a "universal" t-con, it is just common to a panel used in some 60" sets.

What about this one, is it also a universal t-con?:
CMO 35-D003848 T-Con Board (V320B1-L01-C)
Its used in more makes and models, just check shopjimmy.
LVDS signal may be a standard but they can use any pins on any type of plug they want.