LG 60PS80 cable is I op

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gperez
    Member
    • May 2014
    • 11
    • USA

    #1

    LG 60PS80 cable is I op

    Good Evening,

    I have been searching for technical information about my 4.5 year old LG 60PS80. It has been working fine and after a storm the cable stopped working. I switched out a known good cable box but still nothing, no picture or sound. I tried power cycling and still nothing. If I run the "Wei" on it and both the audio and picture work fine. I'm coachable but I am not an electronics person but come here asking humbly for help.

    Regards,

    Greg
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6458
    • Australia

    #2
    Re: LG 60PS80 cable is I op

    Not fully understanding the US "cable box " arrangement, how does the cable box work and connect to the TV to produce video & sound? that is, what ports does it use, RCA, HDMI, etc?

    What was the Wii hooked up to?
    Last edited by tw2005; 05-30-2014, 03:54 AM.

    Comment

    • gperez
      Member
      • May 2014
      • 11
      • USA

      #3
      Re: LG 60PS80 cable is I op

      The "Wei" is a game played using a CD player that is connected via an HDMI cable just as the cable companies box is. The cable box is used for selecting and viewing tv programs.

      Comment

      • tw2005
        Badcaps Legend
        • Oct 2011
        • 6458
        • Australia

        #4
        Re: LG 60PS80 cable is I op

        ok, so both are connected to the TV via HDMI. was the Wii connected to the same HDMI port as the cable box would have been?

        If that port worked and you then tried a known working cable box on the same port, that's baffling to me.

        Have you got other TVs to test the cale boxes on?

        Comment

        • gperez
          Member
          • May 2014
          • 11
          • USA

          #5
          Re: LG 60PS80 cable is I op

          Yes, I have 3 other TV's working fine in other rooms of the house. This problem is specific to this tv.

          Comment

          • truep
            Badcaps Veteran
            • Aug 2010
            • 373
            • USA

            #6
            Re: LG 60PS80 cable is I op

            Have you plugged the cable box into the same port (HDMI) as the wii? If it doesn't work there you have a bad cable box or splitter.

            Comment

            • gperez
              Member
              • May 2014
              • 11
              • USA

              #7
              Re: LG 60PS80 cable is I op

              So I plugged connected the cable box and tv with HDMI component cables and I now have a picture but no sound. Does that help in any way from a diagnostic perspective ?

              Comment

              • gperez
                Member
                • May 2014
                • 11
                • USA

                #8
                Re: LG 60PS80 cable is I op

                And none of the HDMI ports work at all.

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK

                  #9
                  Re: LG 60PS80 cable is I op

                  That makes sense, it is possible that the power surge damaged your HDMI ports. Unfortunately the only fix will be to replace the main board or get it repaired.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  • gperez
                    Member
                    • May 2014
                    • 11
                    • USA

                    #10
                    Re: LG 60PS80 cable is I op

                    Would you be able to tell me the cost of the main board.

                    Product # 60PS80

                    Serial # 912RMHR041873

                    Thanks in advance,

                    Greg

                    Comment

                    • tw2005
                      Badcaps Legend
                      • Oct 2011
                      • 6458
                      • Australia

                      #11
                      Re: LG 60PS80 cable is I op

                      Originally posted by gperez
                      .............. If I run the "Wei" on it and both the audio and picture work fine..............
                      Originally posted by gperez
                      The "Wei" is a game played using a CD player that is connected via an HDMI cable just as the cable companies box is. The cable box is used for selecting and viewing tv programs.
                      Originally posted by gperez
                      So I plugged connected the cable box and tv with HDMI component cables and I now have a picture but no sound.............
                      Originally posted by gperez
                      And none of the HDMI ports work at all.
                      Certainly an unusual one, if Wii works 100% ok on the HDMI, but another device does not.

                      Comment

                      • gperez
                        Member
                        • May 2014
                        • 11
                        • USA

                        #12
                        Re: LG 60PS80 cable is I op

                        Retread my post and I lied !

                        The Wei is connected with a component cable.

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK

                          #13
                          Re: LG 60PS80 cable is I op

                          You will need to open your TV up and read off the EBR and/or EAX numbers from the main board, as these TVs have different boards installed sometimes.
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • tw2005
                            Badcaps Legend
                            • Oct 2011
                            • 6458
                            • Australia

                            #14
                            Re: LG 60PS80 cable is I op

                            Originally posted by gperez
                            Retread my post and I lied !

                            The Wei is connected with a component cable.
                            Cool, now it makes a whole lot of sense.

                            Comment

                            • gperez
                              Member
                              • May 2014
                              • 11
                              • USA

                              #15
                              Re: LG 60PS80 cable is I op

                              Anyone want to take a guess on cost to replace the main board ?

                              Comment

                              • tw2005
                                Badcaps Legend
                                • Oct 2011
                                • 6458
                                • Australia

                                #16
                                Re: LG 60PS80 cable is I op

                                $367.54, $378.36, $476.24, $507.86

                                Comment

                                • gperez
                                  Member
                                  • May 2014
                                  • 11
                                  • USA

                                  #17
                                  Re: LG 60PS80 cable is I op

                                  May I assume your quoting the cost of the part depending on the specific board in this tv ?

                                  Comment

                                  • tom66
                                    EVs Rule
                                    • Apr 2011
                                    • 32560
                                    • UK

                                    #18
                                    Re: LG 60PS80 cable is I op

                                    Typically a main board directly from LG is about $300 to $400 which is frankly stupid money, given you could get a new 60" for about twice that.

                                    You may however be able to find a used main board (pull from a scrap TV) for about $100 to $200. Maybe even less, you don't know for sure until we get part numbers.

                                    To be sure, we need those EAX/EBR numbers.
                                    Last edited by tom66; 06-01-2014, 05:25 AM.
                                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                    Comment

                                    • tw2005
                                      Badcaps Legend
                                      • Oct 2011
                                      • 6458
                                      • Australia

                                      #19
                                      Re: LG 60PS80 cable is I op

                                      Originally posted by gperez
                                      May I assume your quoting the cost of the part depending on the specific board in this tv ?
                                      I'm half guessing, based on no part number provided. I assumed you had a cost since you asked if anyone wanted to have a guess.

                                      However, if it turns out to be ebt60722602 then I found nothing used so they're new prices from various searches.

                                      Hope you have some luck given those crazy prices.

                                      Comment

                                      • gperez
                                        Member
                                        • May 2014
                                        • 11
                                        • USA

                                        #20
                                        Re: LG 60PS80 cable is I op

                                        Originally posted by tom66
                                        Typically a main board directly from LG is about $300 to $400 which is frankly stupid money, given you could get a new 60" for about twice that.

                                        You may however be able to find a used main board (pull from a scrap TV) for about $100 to $200. Maybe even less, you don't know for sure until we get part numbers.

                                        To be sure, we need those EAX/EBR numbers.
                                        So if I was going to scrap this repair project and buy a new 60" what type and manufacturer would you purchase ?

                                        Comment

                                        Related Topics

                                        Collapse

                                        • Patch2
                                          Cable Repair
                                          by Patch2
                                          I have a broken connector (believe it's a 6 pin mini-DIN) on a cable. The metal shroud and all but one of the pins are separated from the cable, and just stuck together for the photo. The other end is an unknown rectangular connector. The cable is for the foot pedals on an Italian made electronic piano, and the company is out of business. Looking for ideas on how to fix it. I have a soldering iron, but I'm not very skilled at soldering, so getting a retrofit for the broken end may be beyond my ability. The other end would be easier to replace, if I could get a mini-DIN cable with the same number...
                                          01-02-2025, 06:04 PM
                                        • mecha1166
                                          KDL-60EX500. Comes on fine, sound is fine, backlights come on. Blank screen.
                                          by mecha1166
                                          KDL-60EX500. Comes on fine, sound is fine, backlights come on. Blank screen. Already tried reset POWER/VOL-. Anyone else have this problem? Possibly bad T-Con RUNTK4244ZZ or panel? Could main or power supply cause this? There were 2 blown 560u 35v on power going to backlights but they were still working fine. Thanks for your help.
                                          11-25-2024, 05:22 PM
                                        • CapLeaker
                                          Dell ATX PSU won’t start, but forcing it works fine?
                                          by CapLeaker
                                          Got a case of something new weird at work. There is an old 2nd gen Intel i3 in an old “Pizza box” shell that has a small form factor power supply. Unfortunately I forgot to take pictures and model number off it.

                                          Anyway, I get to work and get to look at this computer. Standby LED on the PSU is on, but the computer won't start. Hmm o.k. take the battery out of the main board try again, nothing. O.k. then… unplug the power supply from the main board and put in a full size ATX PSU (yeeeesss! Exact that blown Powerman IP that I fixed a while back), plug it in and the old...
                                          10-28-2024, 06:59 PM
                                        • emil_t
                                          RTX3090 working fine but fans not spinning
                                          by emil_t
                                          Hello guys. I have a problem with a PNY XLR8 GAMING RTX3090 graphics card. The problem is that it displays and works fine, but the fans don't spin at all. The problem occurred when someone else removed the fans in order to clean it and broke one of the fan connectors. He replaced it himself and after that, it wasn't working anymore. I guess he damaged something else in the process. What i have done so far: I found 2 capacitors next to the connector that were in a bad shape, he must have touched them with his tools - they weren't shorted, but i replaced them with similar ones from a similar card....
                                          04-12-2024, 06:54 AM
                                        • fweonea
                                          HP-Pavilion x360 Laptop Dead After USB-C Cable Connection
                                          by fweonea
                                          While at university, I connected my HP-Pavilion x360 14-dw0156ng laptop, running Windows 10, to a monitor using a provided USB-C cable. Immediately after this, my laptop's screen turned black and the device stopped working entirely. There are no signs of life such as fan noise or LED indicators, holding the power button does nothing. I've previously used this same monitor model and cable without issues, the cable typically charges the laptop as well.
                                          I've attempted holding the power button for over 30 seconds, removing and reinserting the battery, and trying to power it on with only the...
                                          01-16-2024, 11:35 AM
                                        • Loading...
                                        • No more items.
                                        Working...