samsung ue40d6100 has no backlight no sound and image

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wolf1976
    Senior Member
    • Oct 2023
    • 113
    • Ελλάδα
    #1

    samsung ue40d6100 has no backlight no sound and image

    hi to all
    on the above model of samsung i have the faults i have told already on the title
    iI have standby i can from remote control open and close the tv and it seems reacts the tv when i press someone button from remote control but and with the help of a torch i cannot see anything image on the tv and no sound
    any idea from someone what can i measure so i can find the problem ?
    the power supply is the bn44-00482a i cannot find the service manual so i can test if the leds are ok and maby these are the cause of my problem
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Ierwin
      Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
      by Ierwin
      Hello everyone,
      Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
      The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
      He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
      I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
      Anyway I still fully expect that there has been something seriously damaged...
      05-13-2025, 03:31 PM
    • Mgiffune
      Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
      by Mgiffune
      I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

      I ordered a supposedly ‘new' Tcon board this time, and      ...
      06-09-2024, 10:28 AM
    • learnmore
      Samsung QE55Q60TAUXXU - flashing backlight and flashing standy light--no image
      by learnmore
      Hello Community!

      CASE DETAILS

      Promblem Signs: Backlight on 1 sec off 7sec > repeat && Red standby light: 1blink, off 3 sec, 2 blinks, off 5 secs, 2 blinks, off 3 sec, restart cycle

      13V present on powerboard output. Backlight continues flashing after removing cables to pannel one at a time and even with both disconnected. NOTE: backlight STOPs flashing and remains on when connector between powerboard and mainboard (note Tcon built in) is disconnected.

      Tried inserting firmware on USB and left it in for a few hours, but no change
      ...
      03-03-2024, 09:49 AM
    • TR103
      Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
      by TR103
      Hi, I have a Samsung UE50TU with:
      - sound and backlight, but no picture
      - when it arrived, it had a picture for a few seconds
      - it keeps rebooting
      - without ribbon cable between the two panel boards, it does not reboot but I have no picture
      - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
      - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

      - without cable between mainboard and lcd panel and with a jumpered...
      01-22-2025, 04:12 PM
    • Max514
      Samsung UN55H8000 sound but no backlight no video
      by Max514
      Hi all,

      Ok so I have this beautiful un55h8000 samsung tv with sound but no video nor backlight. When turning the set on the red light blinks 5 times.

      The screen shows no damage and backlight turns on when I disconnect the power supply from the main board. The tcon board only has 2 out of 3 leds on.

      I came across this page and followed the different steps: https://techhometravel.com/samsung-u...ight-no-video/
      • Unplugging the main board cable at the power supply >>> backlights came on.
      • BLU_ON signal from the
      ...
      04-14-2022, 10:34 AM
    • Loading...
    • No more items.
    Working...