Sharp lc-55p6000u won't turn on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JunkmanJimbo
    Senior Member
    • Mar 2017
    • 192
    • United States

    #1

    Sharp lc-55p6000u won't turn on

    Sharp lc-55p6000u won't turn on. The standby light is on but nothing happens when the power button on the tv or remote is pushed. I'm thinking this is a main board issue but they are expensive. I was wondering if anybody could tell me how to repair the main board I have. There is a repair service on Ebay but they're also expensive. Since there's a repair service for this main board I was hoping somebody could help me with the repair. The main board part number is 221999. Thanks!!
    Attached Files
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6355
    • Germany

    #2
    before make judgment on MB... need to test yours PSU as stand alone to be sure when it receive power-.ON will switch on and provide V to MB

    Comment

    • JunkmanJimbo
      Senior Member
      • Mar 2017
      • 192
      • United States

      #3
      I just found what appears to be a faulty IC chip on the main board.
      Attached Files

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4524
        • Russia

        #4
        This is eeprom 24C256, what makes you think that it is not working properly, it looks like paint.

        Comment

        • JunkmanJimbo
          Senior Member
          • Mar 2017
          • 192
          • United States

          #5
          Originally posted by lotas
          This is eeprom 24C256, what makes you think that it is not working properly, it looks like paint.
          I scraped it off the best I could so maybe it was paint. Will this eeprom cause the tv to show the standby light but not turn on?

          Comment

          • lotas
            Badcaps Legend
            • Jan 2016
            • 4524
            • Russia

            #6
            Your motherboard and power supply are not made by Sharp, but are assembled on the same chassis as HISENSE, and they have models that do not go into operating mode due to non-working backlighting (sophisticated backlight protection).

            Comment

            • JunkmanJimbo
              Senior Member
              • Mar 2017
              • 192
              • United States

              #7
              Originally posted by lotas
              Your motherboard and power supply are not made by Sharp, but are assembled on the same chassis as HISENSE, and they have models that do not go into operating mode due to non-working backlighting (sophisticated backlight protection).
              So, are you saying that this eeprom will or will not cause the tv to show the standby light but not turn on?

              Comment

              • JunkmanJimbo
                Senior Member
                • Mar 2017
                • 192
                • United States

                #8
                Originally posted by JunkmanJimbo

                So, are you saying that this eeprom will or will not cause the tv to show the standby light but not turn on?
                Can someone answer this question, please?

                Comment

                • Diah
                  Badcaps Legend
                  • Feb 2013
                  • 6355
                  • Germany

                  #9
                  Originally posted by JunkmanJimbo

                  Can someone answer this question, please?
                  we are here not for challenge... you suspect IC , lotas was hurry to tell its eeürom belong to SW.... look at it pin 1234 where and how they connected or goes... this had nothings to do with STBY and start,,, all this judgment regards the photos you upload,.
                  Last edited by Diah; 09-29-2024, 03:28 PM.

                  Comment

                  • JunkmanJimbo
                    Senior Member
                    • Mar 2017
                    • 192
                    • United States

                    #10
                    Originally posted by Diah

                    we are here not for challenge... you suspect IC , lotas was hurry to tell its eeürom belong to SW.... look at it pin 1234 where and how they connected or goes... this had nothings to do with STBY and start,,, all this judgment regards the photos you upload,.
                    Thank you Diah. With that said, can you tell me the repairs that need to be made to get this board working again? As I said there is someone on Ebay offering repair for a high price. I can't afford it so I would rather find a way to fix it myself, with you guys help.

                    Comment

                    • Diah
                      Badcaps Legend
                      • Feb 2013
                      • 6355
                      • Germany

                      #11
                      Originally posted by JunkmanJimbo

                      Thank you Diah. With that said, can you tell me the repairs that need to be made to get this board working again? As I said there is someone on Ebay offering repair for a high price. I can't afford it so I would rather find a way to fix it myself, with you guys help.
                      first be sure yours PSU working, test it as standalone ,, if it supply all V needed abd as the print chart of it,,, then you go to MB to check why no power on signal send to PSU

                      Comment

                      • JunkmanJimbo
                        Senior Member
                        • Mar 2017
                        • 192
                        • United States

                        #12
                        Originally posted by Diah
                        first be sure yours PSU working, test it as standalone ,, if it supply all V needed abd as the print chart of it,,, then you go to MB to check why no power on signal send to PSU
                        Actually I decided to order a board. It should be here Wednesday. I will update after that. Thanks for you help!

                        Comment

                        • JunkmanJimbo
                          Senior Member
                          • Mar 2017
                          • 192
                          • United States

                          #13
                          Originally posted by JunkmanJimbo

                          Actually I decided to order a board. It should be here Wednesday. I will update after that. Thanks for you help!
                          UPDATE: The main board was the problem. I just wish there was someone on here that could have told me how to fix the old one in order to save money. But, thanks for the help as always!

                          Comment

                          Related Topics

                          Collapse

                          • advant
                            Driving a Sharp TCON/panel with a universal main board
                            by advant
                            This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                            I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                            02-03-2020, 12:25 AM
                          • Dani_2024
                            Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                            by Dani_2024
                            Hi and thanks in advance for any input you might provide!
                            I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                            Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                            Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                            10-28-2024, 05:06 PM
                          • jb_Bak
                            Sony xbr-65x900c main board issues?
                            by jb_Bak
                            Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                            Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                            Power Board Connector that goes to Main board
                            CN6401
                            Pin 01 NC
                            Pin 02 NC
                            Pin 03 "BL_ON": 0V
                            Pin 04 "N/C"
                            Pin 05 "STBY 3.3V": 3.5V
                            Pin 06 "GND": N/C
                            Pin 07 "AC_OFF"...
                            09-27-2021, 04:52 PM
                          • cheeky2
                            Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                            by cheeky2
                            I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                            Obviously the same LVDS connector for the screen connection...
                            05-25-2024, 03:27 AM
                          • Asraf Atb
                            Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
                            by Asraf Atb
                            Hi everyone,

                            Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

                            Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

                            I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
                            01-27-2025, 05:02 PM
                          • Loading...
                          • No more items.
                          Working...