Sharp lc-55p6000u won't turn on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JunkmanJimbo
    Senior Member
    • Mar 2017
    • 192
    • United States

    #1

    Sharp lc-55p6000u won't turn on

    Sharp lc-55p6000u won't turn on. The standby light is on but nothing happens when the power button on the tv or remote is pushed. I'm thinking this is a main board issue but they are expensive. I was wondering if anybody could tell me how to repair the main board I have. There is a repair service on Ebay but they're also expensive. Since there's a repair service for this main board I was hoping somebody could help me with the repair. The main board part number is 221999. Thanks!!
    Attached Files
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6333
    • Germany

    #2
    before make judgment on MB... need to test yours PSU as stand alone to be sure when it receive power-.ON will switch on and provide V to MB

    Comment

    • JunkmanJimbo
      Senior Member
      • Mar 2017
      • 192
      • United States

      #3
      I just found what appears to be a faulty IC chip on the main board.
      Attached Files

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4451
        • Russia

        #4
        This is eeprom 24C256, what makes you think that it is not working properly, it looks like paint.

        Comment

        • JunkmanJimbo
          Senior Member
          • Mar 2017
          • 192
          • United States

          #5
          Originally posted by lotas
          This is eeprom 24C256, what makes you think that it is not working properly, it looks like paint.
          I scraped it off the best I could so maybe it was paint. Will this eeprom cause the tv to show the standby light but not turn on?

          Comment

          • lotas
            Badcaps Legend
            • Jan 2016
            • 4451
            • Russia

            #6
            Your motherboard and power supply are not made by Sharp, but are assembled on the same chassis as HISENSE, and they have models that do not go into operating mode due to non-working backlighting (sophisticated backlight protection).

            Comment

            • JunkmanJimbo
              Senior Member
              • Mar 2017
              • 192
              • United States

              #7
              Originally posted by lotas
              Your motherboard and power supply are not made by Sharp, but are assembled on the same chassis as HISENSE, and they have models that do not go into operating mode due to non-working backlighting (sophisticated backlight protection).
              So, are you saying that this eeprom will or will not cause the tv to show the standby light but not turn on?

              Comment

              • JunkmanJimbo
                Senior Member
                • Mar 2017
                • 192
                • United States

                #8
                Originally posted by JunkmanJimbo

                So, are you saying that this eeprom will or will not cause the tv to show the standby light but not turn on?
                Can someone answer this question, please?

                Comment

                • Diah
                  Badcaps Legend
                  • Feb 2013
                  • 6333
                  • Germany

                  #9
                  Originally posted by JunkmanJimbo

                  Can someone answer this question, please?
                  we are here not for challenge... you suspect IC , lotas was hurry to tell its eeΓΌrom belong to SW.... look at it pin 1234 where and how they connected or goes... this had nothings to do with STBY and start,,, all this judgment regards the photos you upload,.
                  Last edited by Diah; 09-29-2024, 03:28 PM.

                  Comment

                  • JunkmanJimbo
                    Senior Member
                    • Mar 2017
                    • 192
                    • United States

                    #10
                    Originally posted by Diah

                    we are here not for challenge... you suspect IC , lotas was hurry to tell its eeΓΌrom belong to SW.... look at it pin 1234 where and how they connected or goes... this had nothings to do with STBY and start,,, all this judgment regards the photos you upload,.
                    Thank you Diah. With that said, can you tell me the repairs that need to be made to get this board working again? As I said there is someone on Ebay offering repair for a high price. I can't afford it so I would rather find a way to fix it myself, with you guys help.

                    Comment

                    • Diah
                      Badcaps Legend
                      • Feb 2013
                      • 6333
                      • Germany

                      #11
                      Originally posted by JunkmanJimbo

                      Thank you Diah. With that said, can you tell me the repairs that need to be made to get this board working again? As I said there is someone on Ebay offering repair for a high price. I can't afford it so I would rather find a way to fix it myself, with you guys help.
                      first be sure yours PSU working, test it as standalone ,, if it supply all V needed abd as the print chart of it,,, then you go to MB to check why no power on signal send to PSU

                      Comment

                      • JunkmanJimbo
                        Senior Member
                        • Mar 2017
                        • 192
                        • United States

                        #12
                        Originally posted by Diah
                        first be sure yours PSU working, test it as standalone ,, if it supply all V needed abd as the print chart of it,,, then you go to MB to check why no power on signal send to PSU
                        Actually I decided to order a board. It should be here Wednesday. I will update after that. Thanks for you help!

                        Comment

                        • JunkmanJimbo
                          Senior Member
                          • Mar 2017
                          • 192
                          • United States

                          #13
                          Originally posted by JunkmanJimbo

                          Actually I decided to order a board. It should be here Wednesday. I will update after that. Thanks for you help!
                          UPDATE: The main board was the problem. I just wish there was someone on here that could have told me how to fix the old one in order to save money. But, thanks for the help as always!

                          Comment

                          Working...