Re: Bush LY1911WCW Blowing Mains Fuse
That won't matter for a mains powered device.
That won't matter for a mains powered device.
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Bush LY1911WCW Blowing Mains Fuse
what high ohms reading are you getting on f2? edit on post 20Comment
-
Re: Bush LY1911WCW Blowing Mains Fuse
ok made some progress on this one, now getting a standby light but still won't turn onComment
-
Re: Bush LY1911WCW Blowing Mains Fuse
What voltage do you get on the standby pins, 5V?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Bush LY1911WCW Blowing Mains Fuse
none are marked but seeing just below 5v and just below 12v on 12v lineOriginally posted by tom66 View Post
think it's fit for the bin now though, lvds was attatched to the screen and because there so compact i let it slip and it's pulled out pins from the cable
having a bad week
Comment
Comment