Re: Bush LY1911WCW Blowing Mains Fuse
That won't matter for a mains powered device.
That won't matter for a mains powered device.
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Bush LY1911WCW Blowing Mains Fuse
what high ohms reading are you getting on f2? edit on post 20Comment
-
Re: Bush LY1911WCW Blowing Mains Fuse
ok made some progress on this one, now getting a standby light but still won't turn onComment
-
Re: Bush LY1911WCW Blowing Mains Fuse
What voltage do you get on the standby pins, 5V?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Bush LY1911WCW Blowing Mains Fuse
none are marked but seeing just below 5v and just below 12v on 12v line
think it's fit for the bin now though, lvds was attatched to the screen and because there so compact i let it slip and it's pulled out pins from the cable
having a bad week
Comment
-
TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage and promote a safe environment for electronic and electrical equipment, our single-use chip fuses provide performance stability to support applications with current ratings from .5A up to 20A.
TE Circuit Protection also offers the telecom FT600 fuse for telecommunications applications. This telecom fuse helps comply with North American overcurrent protection requirements, including Telcordia, GR-1089,...10-07-2024, 06:07 AM -
Hi,
ive picked up a Samsung UE32F5500AK TV with a BN44-006056A power pcb.
It was reported as `blowing the fuse` - the 3A one in the plug.
on quick inspection of the power pcb, a ceramic capacitor CM802 has blown apart.. photo attached.
Ive found a PDF of the circuit schematic and can identify the neighbouring components (RM801, RM802) but cannot find CM802 on the schematic.
Can anyone identify what CM802 is ?
thanks.
S.... -
TF-FUSE Thin Film Surface Mount Fuses
FF Series (Very Fast Acting), 0603 Size
Features
● Very fast acting at 200% overload current levels
● Low DCR
● High inrush current withstanding capability
● Fiberglass enforced epoxy fuse body
● Copper termination with nickel and tin plating
● Halogen free, RoHS compliance and lead-free
Applications
● Notebook computers and tablets
● Digital cameras
● Memory cards
● Toys
● Bluetooth earphones
● Portable electronic devices...10-07-2024, 05:50 AM -
I was working on this machine yesterday and I now going to use an incandescent lights instead of a fuses to figure out what the issue is with it blowing control voltage rail but this not the only issue the coolant pump failed the meager test as well as the main motor as well this motor has 12 motor wire leads instead of the normal 9 wires
This metal lathe has a weird motor setup it has a soft start motor with a “Y” and a delta type of motor winding setup and it is not done in the motor pucker head enclosure it is with four different contactors wired in a configuration I have not... -
Looking for some assistance please.
Trying to repair a PD27AOQ samsung power board.
Initially had the typical problem of cm806 capacitor blown, additionally thermistor NT801s blown.
Replaced the ceramic capacitor, str60252s, bridge rectifier, thermistor and fuse.
Testing it the fuse blows immediately power is turned on.
diodes dm852 and dm853 test as shorted when in the board but fine when removed.
any assistance, guidance would be appreciated.
Comment