Vizio VP50 HDTV10A replaced caps panel turns on no picture or sound.

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Shane711
    Badcaps Veteran
    • Dec 2014
    • 493
    • USA
    #21
    Re: Vizio VP50 HDTV10A replaced caps panel turns on no picture or sound.

    I have this TV, started working on it today. I found 9 bad caps and replaced them. The TV turns on. All my voltages are good but no picture. All my fuses are good. I left the TV on long enough to warm up. The X-SUS board warms up pretty good but not sure about the Y-SUS, it has 2 heat sinks and only the larger one warms up so I am guessing I have a problem with the Y-SUS board. Not sure if I want to change the module, they are pain.

    I am going to try replacing more caps on the PS just to be sure but I have little hope.
    Last edited by Shane711; 04-15-2016, 05:51 PM.

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        ORIGINAL POWER SUPPLY BOARD
        7 Photos
        11-22-2024, 01:46 PM
      • ChaosLegionnaire
        what i went through dealing with my mobo with dead onboard sound!
        by ChaosLegionnaire
        so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

        i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
        09-13-2022, 09:02 AM
      • SS454
        vizio e650i-a2 backlight flashes then turns off
        by SS454
        vizio e650i-a2 (LWJAOZBP Serial) led backlight flashes then turns off, has video (via flashlight) and audio.

        panel: au optronics T650HVN05.4
        72 led total on 12 strips, 6 led per strip wired in three groups of 24 (led driver board has three anode and three cathode pins)
        link to datasheet: https://datasheetspdf.com/pdf-file/8.../T650HVN05.4/1

        Vizio 56.04219.641G (liteon PA-3231-01WN-LF) Power Supply Unit
        https://www.shopjimmy.com/vizio-56-0...-power-supply/

        Vizio 55.75J01.001G (91.75J10.004G) Main Board...
        08-20-2020, 03:57 PM
      • ggil44
        Vizio M65-E0 No Picture, No Sound
        by ggil44
        Hi I inherited a Vizio M65-E0 that isn't working. It must have been dropped on the corner because I found that the infrared circuit had a capacitor with one end broken off of the board and some green corrosion around the plug to the main board. I re-soldered the capacitor and cleaned the corrosion well and tried turning the M65-E0 on and I was successful. My problem is that while the back lights come on and appear to perform local dimming there is no picture or sound. It kind of looks like you are looking at the TV through a very dense fog, where changing the input on the remote will change bright...
        09-03-2024, 08:30 PM
      • Super360
        Vizio E701i-A3 Vizio logo flashing then turns off
        by Super360
        Ok so here's the story. I was watching tv one day when all of a sudden I heard a pop from the back of the tv set and rushed to unplug the set. By this time the tv already had smoke coming out the back. It was not storming or inclement weather that day to cause a power surge to the best of my abilities. When I opened the tv up, I found that the three capacitors on the psu (highlighted in red) were all bulging and looked they had exploded. I replaced all of them right away and when I went to start up the tv after the "fix" it started just showing the flashing vizio logo as soon as power...
        07-25-2024, 07:06 PM
      • Loading...
      • No more items.
      Working...