ok so this thing is swollen and looks like it needs replaced correct? it is the main cap off polaroid 32 IN LCD TV POWER SUPPLY, BUT IT SAYS 150UF 450WV, I CANT SEEM TO LOCATE ONE OF THESE? ANY HELP
help with this capacitor
Collapse
X
-
Tags: None
-
Re: help with this capacitor
What is the diameter and the length?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: help with this capacitor
Some of those caps have a plastic dome top that makes the cap look like its bulging on top. If you can peel back the cap wrap and pop that plastic piece off the top and see if its leaking.
I have worked on several car amps that have those plastic dome topper caps and they have all been fine.Comment
-
Re: help with this capacitor
Some of those caps have a plastic dome top that makes the cap look like its bulging on top. If you can peel back the cap wrap and pop that plastic piece off the top and see if its leaking.
I have worked on several car amps that have those plastic dome topper caps and they have all been fine.Comment
-
Re: help with this capacitor
Is it bulging or completely flat? If it's flat then the cap is probably OK. You can use ESR/cap meter to be certain.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: help with this capacitor
Keep 450v, use 150uF or higher.
Examples:
http://www.digikey.com/product-detai...378-ND/3134334
http://www.digikey.com/product-detai...379-ND/3134335
http://www.digikey.com/product-detai...200-ND/2600242
http://www.digikey.com/product-detai...355-ND/3134311
http://www.digikey.com/product-detai...199-ND/2600243
http://www.digikey.com/product-detai...201-ND/2600245
Check diameter and height and you're good to go.Comment
Related Topics
Collapse
-
by PrologHi people, I hope this is the correct spot to post this, I'm new to the forum.
I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.
I hope these photos make it clear which component I am referring to:
(yes, the soldering is a bit botched from removing the blown one, I know)
I have found the board schematic (attached), but there does not seem to be a boardview available. I have never... -
by chth96I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
I know that these capacitor will not last as long as nichicon capacitor...-
Channel: General Capacitor Questions & Issues
-
-
by chth96I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm
And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...-
Channel: General Capacitor Questions & Issues
-
-
by chth96When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.
Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
Rubycon YK DataSheet (b...-
Channel: General Capacitor Questions & Issues
-
-
by chth96a few days ago I finally purchased mser-100 v2 and I tested its abillity of measuring ESR value.
I found that It shows pretty accurate ESR value for electrolytic capacitor,But When I measure polymer capacitor of dreamcast game console,I found that one third of polymer capacitor's ESR value is more than twice the value of ESR meter table.(for example, I measured one polymer capacitor of 6.3v 100uf, It showed ESR value of 7.68)
Although my dreamcast now turns 20 years old but it still works. I occasionally have played game with it.
Is this ESR value of polymer capacitor correct?...-
Channel: General Capacitor Questions & Issues
-
- Loading...
- No more items.
Comment