I have an LG 42LB5D that has no picture but has sound and has backlights. I opened it up and found many bad caps on the power board. A lot of them were puffed at the top, I replaced all of those with new ones, and changed out the other similar caps as well. The set still didn't work so I went back and swapped out the remaining ones in that area.
I did not test or touch the two biggest capacitors on the board.
I left 2 smaller remaining caps that I tested as good with a capacitance and ESR meter.
Not sure where to go next, any suggestions?
(Note: the green caps where the old ones)
I did not test or touch the two biggest capacitors on the board.
I left 2 smaller remaining caps that I tested as good with a capacitance and ESR meter.
Not sure where to go next, any suggestions?
(Note: the green caps where the old ones)
Comment