Help with Vizio E320-A0

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wreese06
    New Member
    • Feb 2014
    • 3
    • USA

    #21
    Re: Help with Vizio E320-A0

    Where did you buy the main board?

    Comment

    • Jay4065
      New Member
      • Nov 2015
      • 2
      • USA

      #22
      Re: Help with Vizio E320-A0

      Originally posted by wadehavens
      Yes. I am getting 24v to the two wires going to the panel.
      Thanks for your help!
      I have the same problem but am only getting 19V at the pins? Bad power board?

      Comment

      Related Topics

      Collapse

      • cheeky2
        Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
        by cheeky2
        I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
        Obviously the same LVDS connector for the screen connection...
        05-25-2024, 03:27 AM
      • Dani_2024
        Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
        by Dani_2024
        Hi and thanks in advance for any input you might provide!
        I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
        Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

        Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
        10-28-2024, 05:06 PM
      • gavric
        Vizio M70-C3 Half picture is bad, main board on its last leg?
        by gavric
        Hello, i am working on Vizio M70-C3. It can hardly power on, it takes 15 power button presses or remote. Seems like eeprom problem that I seen before but all reading online says that this tv has power board or main board problem.

        When tv powers on vizio V logo shows nice on whole screen. picture 1
        When it goes into tv mode it only shows good picture on left side of screen, right is all scrabbled up. pic 2
        When i start youtube picture shows on left side fine, right is all scrambled. pic 2
        When i click video to start playing picture goes black(like when you change...
        09-02-2021, 08:55 PM
      • fharris1977
        Vizio D50u-D1 Dead: PSU or Main Board?
        by fharris1977
        Hi. Anyone who has experience with these vizio sets, which pin on this connector is the standby, the 5V pin? Trying to rule out the PSU before ordering a mainboard. I'm getting 0 Volts on all pins on this connector. Trying to jump the standby and PS ON pins to see if the PSU is functioning. Thanks in advance.
        03-12-2024, 12:22 PM
      • mrtek
        Vizio M65-C1
        by mrtek
        Hi.

        picked up another TV. This time is a Vizio M65-C1. TV does not turn on. I had repaired another 60 inch vizio , Bad main board.
        When power button is pressed, the Power led indicator on the bottom right, turns for a few seconds and then it fades away. No backlight or Vizio logo on screen. Removed back cover and repeated test.
        This is the TV This TV is a little different from the Samsung I have worked on. Power supply is on the Left side, Main Bd is on the right side, T-CON , not in the picture is on the bottom. I am assuming that the boards in the middle are the LED...
        07-14-2025, 07:28 PM
      • Loading...
      • No more items.
      Working...