Whoever owns Sharp these days may be getting creepy about the downloadable updates, I would contact them, tell them you need the latest update or just the firmware. They should be willing to send it to you, the tv isn't very old after all. Not sure off hand if this tv can auto update or if you need the screen and remote or button clicks. As usual start off nice, if they throw up a wall, tell them your blogging about how they wouldn't help you and their products are junk. Looks like sharp is off my list too. If they don't have firmware readily available on their website for a 1 year old tv, then that is a sad disgrace.
I am looking / wondering if anyone knows where a good firmware download link is for a LC-60LE640U, the sharp support sight says the screen is archived but offers no links.
I see backlite is active,
but I cannot get the screen to return back to menus , etc
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Hi driends!!!
I have a SHARP tv LC-60LE652E with a QPWBXG135WJN2 that has its stand-by light blue on but that does not power on.... I have checked the power board which seems fine. Its seems that the defect comes from the main board....
I would like to flash the nand chip: a 29F2G08ABAEA ic. Has someone its firmware, please?????
I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.
The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any...
Comment