Sony KDL-40S5500 main board fuse

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #21
    Re: Sony KDL-40S5500 main board fuse

    It's fine if the backlight comes in only through the rear holes. That indicates it is on and that's all that's important for now. Have you checked T-con fuse and 12V to T-con?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • flocko
      Badcaps Legend
      • Nov 2012
      • 1121
      • uk

      #22
      Re: Sony KDL-40S5500 main board fuse

      T.con fuse is good as is the 12v supply, its as if the main is giving out a black screen, if i unplug LDVS then the screen goes white with the backlight showing though, so thats were i am at for now, will up date when i have more to tell, any clues from anyone just jump in Thanks Flocko

      Comment

      • Glitcher
        Badcaps Veteran
        • Mar 2013
        • 673
        • USa

        #23
        Re: Sony KDL-40S5500 main board fuse

        Some of these Sony sets will have the tab bond problem that can cause no picture with backlight. I've had a few of them but I'm not entirely sure about your set though.

        Comment

        • flocko
          Badcaps Legend
          • Nov 2012
          • 1121
          • uk

          #24
          Re: Sony KDL-40S5500 main board fuse

          i dont think its tabs, some thing on the main is my bet and i had one and sold last year, now when i need one nobody has any, Flocko

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #25
            Re: Sony KDL-40S5500 main board fuse

            To confirm if T-con is working, you can check VGH, VGL, VCOM, AVDD and GAMMA voltages on T-con.
            If you have a scope you can confirm if main board is sending video to t-con.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • flocko
              Badcaps Legend
              • Nov 2012
              • 1121
              • uk

              #26
              Re: Sony KDL-40S5500 main board fuse

              i will check those points on the T.con some time tomorrow and will list it up on here for you to see, but no scope never needed one before.will have to keep an eye out for one Flocko

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #27
                Re: Sony KDL-40S5500 main board fuse

                You can get a very decent Rigol DS1074Z now for around £440 or you can buy an older analog scope for around £50.

                I am selling my old Rigol DS1102E to upgrade to the DS1074Z, amazing how much more you get for only a little more (I bought my 1102E at £315 incl VAT and delivery.)
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Related Topics

                Collapse

                • Dani_2024
                  Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                  by Dani_2024
                  Hi and thanks in advance for any input you might provide!
                  I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                  Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                  Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                  10-28-2024, 05:06 PM
                • JDC
                  (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                  by JDC
                  ONN 100012588
                  Issue: No Power, Then Rebooting After Main Board Change

                  Short answer: replace main board and power board
                  Technical answer: replace main board and Q306 & Q307 on power board.

                  Long answer:

                  TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                  07-15-2022, 07:39 AM
                • m1ch43lzm
                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                  by m1ch43lzm
                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                  05-12-2025, 08:37 PM
                • cheeky2
                  Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                  by cheeky2
                  I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                  Obviously the same LVDS connector for the screen connection...
                  05-25-2024, 03:27 AM
                • advant
                  Driving a Sharp TCON/panel with a universal main board
                  by advant
                  This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                  I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                  02-03-2020, 12:25 AM
                • Loading...
                • No more items.
                Working...