but when tv first turned on smart displays correctly
any ideas
-
Hi all I have a ue75ju6400 Samsung tv with a darkened half screen can post pictures
but when tv first turned on smart displays correctly
any ideasLast edited by wreksta79; 06-16-2024, 05:49 AM. -
Looks like your backlights went out. Some of them died -
But they are all on from. The backComment
-
I don't think so. Some are on, not all of them. If I saw that picture, I'd buy/pickup that tv because I don't have to diagnose anything, because I can see some of the backlights are out. Unless this is a weird broken screen.Comment
-
wThis is not bad backlight, is a very common issue with panel signals, more than this i see bad halo / blotches in the backlight, what's the story of the set? Seems someone replaced led strips but misplaced the foils (forgot spacers?)Comment
-
Let's find out. He may reply with that data. I don't see any halo? Also what is the"foil"?Comment
-
sorry sheets..
seems.someone already opened it thinking it had to be fixed the leds but misplaced the sheetsLast edited by Davi.p; 06-17-2024, 02:30 PM.Comment
-
Haha let's see, I never done that. One time I put back a Toshiba fire TV without the diffuser and put it all back together turned it on and the screen had all the led dots and it was transparent. Very cool looking. I still feel like LEDs are out.Comment
-
your case if they were direct LED.. then you have first hard solid plate wrong.. the surface witch not smooth always should be downside..
no way to be mistake replanting strips position because the holes of the reflector sheet will not fit in place..
to the OP problem... it may broken the stand legs which hold the first plate.
Admin cant you fix this..... always text changed... and jumping.... only on your forum..Last edited by Diah; 06-17-2024, 04:13 PM.Comment
-
Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same... -
I’m working on a Samsung tv for my son. When I brought it home the left side of the screen was dim, right side ok. I’ve replaced the LED edge strips, main board and now the power board. The only difference is that the dim side has switched from left to right. Is there something else I should be looking at? I’ve also replaced the ground tape (Faraday tape?) from the LCD screen to the chassis. I probably have a week left on returning the parts.
Any suggestions would be appreciated.
thanks. -
Hi , I've recently replaced the screen in my Samsung galaxy ao2s, at first it wouldn't even turn on, it had the charging symbol on the screen when plugged in but the green circle wasn't going around to show it charging....
Ive eventually managed to get it on and working but it's very temperamental...
The battery icon always reads as 50% , when the phone goes into lock screen mode i sometimes can't get the screen back on unless I plug the charger in to get it to light up, also it keeps putting the camera app on.. u think it could be something to do with the side buttons. ...05-26-2024, 12:05 AM -
Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
The 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it...
Comment