Lg 50pg20-ua buffer compatibility

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • crdz66
    Badcaps Veteran
    • Nov 2012
    • 242
    • USA

    #1

    Lg 50pg20-ua buffer compatibility

    Hello fellas.

    I'm looking for a advice about buffer board compatible board.
    My plasma tv is lg 50pg20-ua and the bottom buffer board is
    ebr50039107 printed on sticker.
    Can't find this part.
    Do you know if the ebr50039101 it is a compatible board?

    Thanks.
  • cliff_hootarski
    Badcaps Veteran
    • Jul 2006
    • 411
    • USA

    #2
    Re: Lg 50pg20-ua buffer compatibility

    Did you search eBay for it. Looks like there are several for sale $75 and up.

    Comment

    • crdz66
      Badcaps Veteran
      • Nov 2012
      • 242
      • USA

      #3
      Re: Lg 50pg20-ua buffer compatibility

      Ebr50039107 none on ebay

      Comment

      Related Topics

      Collapse

      • howardc64
        TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
        by howardc64
        All left and right refers to looking from rear of TV (or looking from front with TV upside down)
        • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
        • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
        ...
        07-24-2025, 05:17 PM
      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • howardc64
        A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
        by howardc64
        Problem

        This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
        08-04-2024, 10:36 PM
      • m1ch43lzm
        HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
        by m1ch43lzm
        Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
        Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
        05-12-2025, 08:37 PM
      • rustinjust
        Technika lcd 32 - 207, question about board compatibility
        by rustinjust
        My main board is a 17MB12-2 and reads underneath that the following number 160807 LF,
        Question is this board going to fit? ( see link) board is identical but from a different brand of tv but board number is same as in that it’s a 17mb12-2 board
        Link to part here https://www.ebay.co.uk/itm/222990805243

        This board is cheapest I can find. Also note:ordered one that was from a technica, an exact replacement, it arrived yesterday and when I fitted it it was a dead board, didn’t even show the standby light. When I piut the old board back in the tv worked but the issue...
        10-06-2023, 08:53 AM
      • Loading...
      • No more items.
      Working...