Hi Friends.
I need you value opinion on this problem.
Laptop Lenovo N585
Windows 8.1
AMD VIDEO CARD.
This laptop come to home with non brightness or video.
I hook the laptop use a external monitor and was working good (on external monitor)
So, I proceeded to replace the led screen and as soon I get it installed the backlight works good for a sec and continue super low brightness and good video.
I can't manipulate the adjust brightness button because doesn't respond.
Now I'm working updating...
crdz66
Badcaps Veteran
Last Activity: 05-03-2018, 02:57 PM
Joined: 11-02-2012
Location: Dallas,Texas
-
Laptop Lenovo N585 Brightness Does't Work
-
Re: Led samsung remote doesn't work
there you go... -
Re: Led samsung remote doesn't work
Well back on this tv still the remote doesn't work.
I wondering if the voltage on main board show .6v (on pin IR) is right or need to be higher.?
I replace the ir sensor and still doesn't work.Last edited by crdz66; 02-04-2018, 03:36 PM.Leave a comment:
-
Re: Lg 42ln5300 led strips replace
ok guys thanks.Leave a comment:
-
Lg 42ln5300 led strips replace
Hello everyone.
I have a lg tv model 42ln5300 with black screen but with sound.
I noticed that the voltage going to led strips was too high according the specs.
So i decided to check the led strips and i find one led burn out(1 of the 9) and one full line led strips out (no lights).
So i bought two complete led strips (9 total each).
So far was good.
The problem start when i put everything back panels, boards,etc)
as soon turn on the tv i see shortly light from led strips and turn off and now is back black again.... -
Re: Led samsung remote doesn't work
It's not intelligent one.
I have three samsung remotes on none working on this tvLeave a comment:
-
Led samsung remote doesn't work
Hi everyone.
I need your assistance.
I have a led samsung tv un46f6350afxza with remote control not working.
I test couple remote control on another samsung tv and working good.
History.
This tv was working good until the tv start turn on/off too many times.
I decide change the main board and the problem was fix it, means now work properly keeping on and wifi working good.
But, since i change the main board the same remote stop working.
I already check :
As soon you press power on you see on ir board the voltage... -
Toshiba P55W-B5224 missing parts
Hello.
I'm wondering if somebody can help me with this problem.
I get from somebody a Toshiba Laptop with a lot screws missing.
Since I don't want start playing with short one or long ones (screws), looking for if somebody can provide me a service manual for to know what sizes are.
Toshiba Laptop
Model : P55W-B5224
Thanks -
Re: Sharp led lc-40le653u no power
0 voltsLeave a comment:
-
Re: Sharp led lc-40le653u no power
dump question.
ps_on (3.3v) on sharp led tv is generate on power supply? or coming from main boardLeave a comment:
-
Re: Sharp led lc-40le653u no power
I will check. ThanksLeave a comment:
-
Re: Sharp led lc-40le653u no power
Yes like you see on pic 4. Voltage drop from 5v to 1.17volts once push the power button.Leave a comment:
-
Sharp led lc-40le653u no power
Hello everyone.
I need you value opinion.
I have a tv from a friend that fall to ground and now doesn't turn on.
So far i check the connections on ps and i get 19v on connector cn02 on pin 1,2. (this connector doesn't show standby pic)
on main board i have 5v present on connector coming from power button. But, as soon i pushed, voltage is not present on pin going to ps on/off.
So main board is bad???
Thanks... -
Re: Samsung un55h6203afxza us01 no backlight
Thanks.Leave a comment:
-
Re: Samsung un55h6203afxza us01 no backlight
But, even if led connector is not connected I still have the same readings.
I understand when is connected can have open circuit because the low readings, but what happend when is not connected???. How can open circuit is detected?Leave a comment:
-
Re: Samsung un55h6203afxza us01 no backlight
dump question.
Do I need replace power supply board?Leave a comment:
-
Re: Samsung un55h6203afxza us01 no backlight
Ok.
Connector CNM803 (Main-PS)
1,3,5,7 are 12,7v
9 is 0v
2. 2.3v
4. 3.2
6. 4.4v
8,10 gnd
connector cnl802 led driver (connect to led strings)
m1+ - 280-320v floating
m2+, m3+, m4+, m5+ = 0-7v floating
connector cnl802 led driver (w/o connected)
m1+ - 280-320v floating
m2+, m3+, m4+, m5+ = 0-.3v floating
Additional comments.
As soon turn on the tv, after 3 secs, you can see a quick light from...Leave a comment:
-
Samsung un55h6203afxza us01 no backlight
Hello.
I need you value opinion on this case.
This tv show sound but not backlight or video.
The original ps show really on led drivers connector high value on m1+ but almost 0v on m2+,m3+,m4+ and m5+
that make to take the decision replace not only ps if not the all kit include ps, main board and t-con board.
But still show the same symptoms.
No backlight, no video but sound ok.
The connections on ms1 still remain on 280v-320v fluctuating and another m+ remain 0v.
What i doing wrong or new ps is bad?
... -
Re: HP PAVILION DM4-1160us won't turn on
I did it techman1025 but still doesn't work.
But the light is on on power jackLeave a comment:
-
HP PAVILION DM4-1160us won't turn on
Hello Friends.
I need you value opinion on this weird case for me.
My laptop was working good for several months until one day I decided to hook the screen to the external monitor.
My laptop suddenly stop working and now doesn't turn on at all.
I do open the laptop for to check if I have the right voltages and everything looks right so far until power board connector.
Everytime when I push the power button I realize that signal going thru (3.2v to 0v)
Something weird is power board make blink lights every couple seconds like If the laptop...
No activity results to display
Leave a comment: