Ok, I got both these from my hairdresser and they both had caps swollen in ps. Then they came up but it took a while to warm up until they display picture. So now when you turn them on you get some lines sometimes and other times just the backlight until they warm up. Anyone know what this is?
-
-
Re: Two magnavox 26md357b/37 slow warm up
Can you post a picture of what the lines look like?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Two magnavox 26md357b/37 slow warm up
Most certainly, and thank you.
Last edited by dnafix; 01-20-2014, 06:34 PM.Comment
-
Re: Two magnavox 26md357b/37 slow warm up
So after using a heat gun on the connections that connect into the panel itself from the T-con brd I found this on the net by putting in the t-con brd number.
LinkComment
-
Re: Two magnavox 26md357b/37 slow warm up
Yes - could be bad tab connections - did you repkace the caps and if so what brand/series.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Two magnavox 26md357b/37 slow warm up
Yes, see here for fix
http://www.youtube.com/watch?v=mMo3NBGLwH0Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
Comment