Need firmware dump for SilverCrest 19111C/T LCD (Vestel 17MB60-3 mainboard)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Th3_uN1Qu3
    Believe in
    • Jul 2010
    • 6031
    • Romania
    #1

    Need firmware dump for SilverCrest 19111C/T LCD (Vestel 17MB60-3 mainboard)

    I have this LCD TV/DVD combo which doesn't do anything. Power supply works, all voltages ok, CPU heats up so it must be working, but it does exactly nothing. I would like to try and reflash its firmware, but i've been unable to locate a dump so far.

    If anyone could help, i'll be grateful.
    Originally posted by PeteS in CA
    Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
    A working TV? How boring!
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Need firmware dump for SilverCrest 19111C/T LCD (Vestel 17MB60-3 mainboard)

      I have a 17MB62-2.6 here. Powers on, and CPU gets hot, but it's dead... no lights. Turns out the AVDD3.3V on the CPU is shorted. About 10 ohms to ground. Don't know if it adds anything to your diagnosis, but perhaps the 17MB62-2.6 main board would have similar firmware - I could try extracting it, although it might be best to just send you the flash chip directly.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Th3_uN1Qu3
          Believe in
          • Jul 2010
          • 6031
          • Romania
          #3
          Re: Need firmware dump for SilverCrest 19111C/T LCD (Vestel 17MB60-3 mainboard)

          Do you have a schematic for this board? I found a service manual, but it does NOT have full schematics.
          Originally posted by PeteS in CA
          Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
          A working TV? How boring!

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: Need firmware dump for SilverCrest 19111C/T LCD (Vestel 17MB60-3 mainboard)

              I take it you've looked at this? It looks to have a good deal of the main board for 17MB60. I think -3 is a slight revision, perhaps for different external AC adapter or panel.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • iuliantv
                  Member
                  • Aug 2009
                  • 35
                  • Romania
                  #5
                  Re: Need firmware dump for SilverCrest 19111C/T LCD (Vestel 17MB60-3 mainboard)

                  http://fisierulmeu.ro/4900J5FGLWGJ/W...RE-OK-rar.html

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Tamo Neko
                      Request for MX25VB8035F (1MB) Firmware Dump – Asus TUF Gaming H670-Pro
                      by Tamo Neko
                      Hello everyone,

                      I'm working on an Asus TUF Gaming H670-Pro motherboard and need help finding a firmware dump for the MX25VB8035F (1MB) SPI flash chip.

                      What Happened:
                      I mistakenly removed and erased this 1MB chip, thinking it was part of the main BIOS.
                      • I later found that the board has two main BIOS chips (8MB + 16MB), which I have backups for.
                      • My backup for the MX25VB8035F chip is just an empty 1MB segment filled with FFs, meaning I have no valid data to restore.
                      What I Need:
                      • A firmware dump for the MX25VB8035F chip from the same motherboard (or a compatible
                      ...
                      1 Photo
                      02-12-2025, 11:29 PM
                    • Mephysis
                      DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
                      by Mephysis
                      Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

                      I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
                      03-27-2025, 02:34 AM
                    • massimomax
                      Firmware TV Hitachi 32HE4500 scheda madre Vestel 17MB211S matrice: VES315UNVL-2D-N11
                      by massimomax
                      Chiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende più,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
                      spero che qualcuno può averlo per riprogrammare eprom. grazie

                      Post in English !!!

                      I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you


                      ​
                      02-28-2025, 07:27 AM
                    • anlu
                      Vestel Firmware - Toshiba 32W133DN
                      by anlu
                      Hello, i have an old Toshiba 32W1333DN (sorry, misspelled the headline) TV that had the standby led green/red flashing and no lightup problem, i repaired it by measure the led output as suspect led problem, i measured the LED:s one by one and found one bad led, i replaced the the led-straps and the TV works.

                      Now i need to update the software because the new rc "RM-L890" does not work and i think maybe it could be an firmware issue?, i have struggled to find it without any success because all of the links where invalid, i contacted Toshiba but they do not support this model...
                      02-04-2023, 12:59 AM
                    • piernov
                      Finlux 65-FUC-8060 firmware request (Vestel 17MB130S 23473048 VES650QNTS-2D-U11)
                      by piernov
                      Hi,
                      Got a Finlux 65-FUC-8060 TV that doesn't turn on, 5V standby present from PSU, 3.3V on mainboard present, button signal gets pulled low when pressed, but mainboard never sends signal to PSU to turn main rails on.
                      I suspect corrupt firmware but I haven't been able to find anything for this TV.
                      TV model: Finlux 65-FUC-8060
                      Mainboard: Vestel 17MB130S 23473048
                      Panel: VES650QNTS-2D-U11

                      At the very least looking for a firmware that can make it turn on to confirm the problem, and hopefully a firmware that's compatible with the panel.
                      06-01-2024, 12:57 PM
                    • Loading...
                    • No more items.
                    Working...