Re: LG tv for 25 bucks
Shopjimmy only lists cross references that they have personally seen installed. I have had a couple instances where I took a gamble and it worked.
LG tv for 25 bucks
Collapse
X
-
Re: LG tv for 25 bucks
would this one work ?
I have looked everyone on the web for the part. I am coming up short on the mainboard. If anyone knows anywhere else to get it that would be great. Hate to get this and it not work.
http://www.ebay.com/itm/LG-52LG70-Ma...item4616173c97
Main thing is I don't want to be out the shipping if you decide to try it.Last edited by aaronwt6; 12-06-2013, 01:41 PM.Leave a comment:
-
Re: LG tv for 25 bucks
I am not sure where to find the mainboard at all because everything says it is not in stock.Leave a comment:
-
Re: LG tv for 25 bucks
Tom,
Any idea if he can use that 52" Board on the 47"? I don't have the TV any more to check the panel number. It had a broken screen with only a partially visible image and is long gone.
Shopjimmy doesn't have it as a cross reference. I'm seriously doubting it'll work.Leave a comment:
-
Re: LG tv for 25 bucks
I believe that seller actually is a badcaps member -- aaronwt6 -- you may want to PM him and ask if he has the LCD panel model # to be extra sure. Also ask if he can offer returns, but you will have to pay shipping of course.Leave a comment:
-
Re: LG tv for 25 bucks
would this one work ?
I have looked everyone on the web for the part. I am coming up short on the mainboard. If anyone knows anywhere else to get it that would be great. Hate to get this and it not work.
http://www.ebay.com/itm/LG-52LG70-Ma...item4616173c97Leave a comment:
-
Re: LG tv for 25 bucks
I wiggled the cables on the T-con board and nothing changed. I will look for the main board. I found this model eax55177902. Shopjimmy is out. UGH.Leave a comment:
-
Re: LG tv for 25 bucks
The main board: one with the video inputs on it.
1st try reseating all cables etc. going to the t-con on both ends. Try wiggling while the TV works, any effect on pic?
You need to match the EAX or EBR number... try to match EAX over EBR.Leave a comment:
-
Re: LG tv for 25 bucks
no i do not have an scope. If i was too board swap which should i do ? I tried to look at shopjimmy and did not see it there. I was trying to track down parts. I do not mind doing board swaps just do not know how to match up the boards.Leave a comment:
-
Re: LG tv for 25 bucks
Yeah I can see 120Hz Motion Processor on main board. So if you were to board swap, I'd try that over anything. Though, it is possible it is another fault. To track down you would need a scope. Do you have one?Leave a comment:
-
-
Re: LG tv for 25 bucks
Take shields off both t-con and main and get clear pics of them.Leave a comment:
-
-
Leave a comment:
-
Re: LG tv for 25 bucks
Thanks for your reply. I will post model number as I am picking it up tonight and take a couple pictures.Leave a comment:
-
Re: LG tv for 25 bucks
If this is a TV with has a 100Hz motion processor usually t-con/main board swap will do it.Leave a comment:
-
LG tv for 25 bucks
I am getting this tv for 25 bucks with vertical lines. I am not sure how to begin troubleshooting. If i can not fix it i already own a LG 47 inch and will keep as parts but would love to fix.
Here is what it is doing. I do not have a model number as of yet. I will when i pick it up.
Is this worth fixing or not ??
I have a multimeter and not afraid to use it.Tags: None
Related Topics
Collapse
-
by Dev GooseHi everyone, I recently acquired an HP EliteBook 840 G4 (6050A2854301-MB-A01) that I'm hoping to bring back to life. I'm fairly new to laptop repairs but eager to learn and willing to put in the effort to understand and fix this. Any advice or guidance would mean a lot!
What Happened
The issue started when the laptop was accidentally plugged in with reverse polarity. Before this incident, the laptop would show a power/charging light whenever it was plugged in. However, now it's completely unresponsive—no lights, no power, nothing. I've been doing some research and understand... -
by crownmobile3Good Day specialists, kindly consider my request for finding BoardView and schematic for "Bucks 1.2 WHL UMA 18755-1", Thanks...
-
Channel: Schematic Requests ONLY!
-
-
by Slim_BossHi,
I hope everything is alright with you guys.
First of all, thank you very much for the forum, they are fantastic, very informative.
I have read a few treread but I have a little problem when trying to program my BIOS.
Starting at the beginning, I have an Asus X55A-119X that needed to update the bios (for V.417), I started to do it, but my little son disconnected the laptop from the power when WinFlash was in the "erase" phase. In other words, the laptop has become a paperweight.
I don't have much experience in electronics, I study here and...-
Channel: BIOS Requests ONLY!
-
-
by a316briefly, one usb-c port, when connect when OS running, or in recovery mode, stays on 5v and 000 amp. If I reboot ( or connect usb-c on shutdown state), it makes 20v andbegins charging, until first disconnect/connect.
*** on shutdown state, it makes 20v, charging stops after 4-6 seconds in rare case,, sometimes never stops. If not disconnect, it stay on 20v and charges even after OS boot. after disconnect/connect (ON state) it always stays 5v 000 amp
it is not software issue, it happens only 1 port. other ports including magsafe3 is ok
MB was after liquid... -
by mnciks11I did a video on my channel showing people how to use Badcaps, what to do, how to post on the forum…I have much love for this group, for those who doesn't know how the forum work they can watch as well…Love you all guys I really love this forum
https://youtu.be/tQ54IDb_k2k - Loading...
- No more items.
Leave a comment: