Vizio XVT553SV Main Board Short

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Glitcher
    Badcaps Veteran
    • Mar 2013
    • 673
    • USa

    #1

    Vizio XVT553SV Main Board Short

    So heres a vizio that's non-responsive. Vizio logo glows amber when plugged in but no response when trying to turn on. Seems this one had a power surge through it from a cable box and into the HDMI which I seem to get a lot happening with these vizios.

    All fuses have checked out good.
    I found an IC near the HDMI ports with a burnt hole in it. Anyone know what this chip is and what the label is? I can't make it out because of the hole. I found a repair service on ebay for this main board model, so I'm guessing this is a common problem?

    If I can find what and where to get that shorted chip.
    Attached Files
  • Glitcher
    Badcaps Veteran
    • Mar 2013
    • 673
    • USa

    #2
    Re: Vizio XVT553SV Main Board Short

    So far doing some searches I found the chip might either be
    SIL9385CTU
    or
    SIL9185CTU

    anyone know anything about these chips?

    Comment

    • Duncanbest
      Senior Member
      • Jul 2012
      • 81
      • Taiwan

      #3
      Re: Vizio XVT553SV Main Board Short

      http://www.siliconimage.com/support/

      only show SIL9185 ,no SIL9385



      You can google SIL9185CTU,SIL9385CTU with pictures

      https://www.google.com/search?q=SIL9...w=1334&bih=873
      Last edited by Duncanbest; 11-04-2013, 12:38 PM.

      Comment

      • Glitcher
        Badcaps Veteran
        • Mar 2013
        • 673
        • USa

        #4
        Re: Vizio XVT553SV Main Board Short

        I can find SIL9185 on ebay but nothing on SIL9385. The reason why I feel like it might be SIL9385 is if you zoom into the picture the number before "85" looks a little curved almost like a 3. (I searched every possible numbers on google but came up with those two model numbers that might match)

        Anyway I just removed the chip from the main board, and now I plug in the TV, the vizio logo would blink orange and white about 86 times then finally stay orange. (I remember my other vizio blinks 14 times as a reboot method everytime you disconnect the power but this one is 86?? seems strange...)

        Well after it stops blinking I'm able to turn on the TV now, it'll show the logo on the screen for a second then go away and only show a black screen with backlight. (I was expecting at least the HDMI label while guessing the HDMI ports don't work anymore but its just a blank screen) I'm not exactly sure how this hdmi chip works. And also I'm not able to turn off the TV unless I unplug the power.

        I would think there is a small chances replacing the chip might fix the problem, if I ever figure out the label on the chip. Otherwise I'll need to get a new main board for $150-$200 on ebay.
        Attached Files
        Last edited by Glitcher; 11-04-2013, 04:28 PM.

        Comment

        • f67bird
          Technician
          • Apr 2007
          • 57
          • USA

          #5
          Re: Vizio XVT553SV Main Board Short

          I know this is a dead post, but in cases like these, one thing to try is to look up the board on shopjimmy... and click on the photo of the board.
          They often have very large and clear photos of each side of the board.
          In this case, the photo shows the ic to be sil9385ctu
          Learner

          Comment

          Related Topics

          Collapse

          • Dani_2024
            Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
            by Dani_2024
            Hi and thanks in advance for any input you might provide!
            I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
            Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

            Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
            10-28-2024, 05:06 PM
          • jb_Bak
            Sony xbr-65x900c main board issues?
            by jb_Bak
            Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

            Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
            Power Board Connector that goes to Main board
            CN6401
            Pin 01 NC
            Pin 02 NC
            Pin 03 "BL_ON": 0V
            Pin 04 "N/C"
            Pin 05 "STBY 3.3V": 3.5V
            Pin 06 "GND": N/C
            Pin 07 "AC_OFF"...
            09-27-2021, 04:52 PM
          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • cheeky2
            Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
            by cheeky2
            I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
            Obviously the same LVDS connector for the screen connection...
            05-25-2024, 03:27 AM
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • Loading...
          • No more items.
          Working...