60ps11 Vertical Lines

[crdz66]

Hello Fellas.

I have a Lg 60ps11 with 2 vertical lines crossing the screen. (top-bottom)
Does these lines caused for a buffer boards (called x-board right on lg) ?
or Sustain boards.

Thanks

[tom66]

Re: 60ps11 Vertical Lines

Unfortunately they probably mean the plasma display panel is bad, which is not economically repaired. Can we get a picture of the fault?

[crdz66]

Re: 60ps11 Vertical Lines

Yes of course.

[tom66]

Re: 60ps11 Vertical Lines

That could just be a loose connector for that part of the panel or a bad control board.

[crdz66]

Re: 60ps11 Vertical Lines

Thanks tom66
I going to open this tv and check.

[freakaftr8]

Re: 60ps11 Vertical Lines

I second the control board. Refit.ribbon cables to start.

[crdz66]

Re: 60ps11 Vertical Lines

Hi.
Something I did it was disconnect the control board from x-board left (because does lines show to the left looking at from back) and from x-board center and those lines still are on the screen.

[freakaftr8]

Re: 60ps11 Vertical Lines

Disconnect the wide white ribbons from control board to bottom of the screen and reconnect

[freakaftr8]

Re: 60ps11 Vertical Lines

and if that doesn't work try taking a wooden dowel or something like the back of a screwdriver and while you're watching the screen push on the main IC on the control board and see if the lines disappear

[crdz66]

Re: 60ps11 Vertical Lines

I did it that but still lines are there.
both ways (disconnect and push the ic)

[crdz66]

Re: 60ps11 Vertical Lines

training manual for this tv (page 97)
show
if there is a bar defect on the screen it could be a control board problem.
maybe?????

[freakaftr8]

Re: 60ps11 Vertical Lines

Yes. If I were you id order t he control board. If there were only one line I would be more thinking screen defect but two leads me to believe its the control board.

[crdz66]

Re: 60ps11 Vertical Lines

Thanks for you advice buddy.
I going to try to get and let it know.

[crdz66]

Re: 60ps11 Vertical Lines

Hello Fellas.

I already change the control board and still have two vertical lines.
Bad panel?

Thanks.

[tom66]

Re: 60ps11 Vertical Lines

It is possible for the C boards/X boards to do this too but unlikely.

[crdz66]

Re: 60ps11 Vertical Lines

But what is the chance panel is bad???

[tom66]

Re: 60ps11 Vertical Lines

That is more than possible.

[freakaftr8]

Re: 60ps11 Vertical Lines

Sorry for the advice on changing the control board. Its a crapshoot sometimes.

[Ashroyer05]

Re: 60ps11 Vertical Lines

.