Have a panasonic that i've changed the power board because you turn it on.. the red light turns on and stays on. no screen power but the optical light for sound cuts on.. after 20 minutes you hear the power board click twice .. red light goes out. and cuts right back on... and it just repeats this process. any ideas?
-
-
Re: panasonic TC-l37x2 clicking power
sorry not 20 minutes.. just 20 seconds after it cuts on you hear something on the power board click twice then back to red light on and no screen or sound then repeats every 20 seconds -
Re: panasonic TC-l37x2 clicking power
When the TV starts up, is the red light on solid or does it blink? In other words what you see for the LED does it appear normal for TV to startup.
On our pansonics red is standy, flashes green on startup and solid green when the TV is on and working.
What I'm thinking is a bad or shorted backlight cct. I had a 19" Pana, it would just continually try to start and recycle it self but no fault codes, just kept blink green LED.
I found a shorted H-fet transistor that drove the CCFL transformers. Once I removed the short and isolated the leads to the fluros, it started up normal, had sound and using a flashlight I could see an image.
It only ran for a matter of seconds and shutdown to a 1 blink error or backlight error becaused it did not detect the backlight.
maybe you have a similar issue.Comment
-
Re: panasonic TC-l37x2 clicking power
Sorry had to edit this, I don't touch LCD much, X Series does appear to be CCFL (for a moment thought it was LED)
One of TOM's stockpile of manuals.
Last edited by tw2005; 10-19-2013, 09:10 AM.Comment
-
Re: panasonic TC-l37x2 clicking power
It's EEFL which is very similar to CCFL but has external electrode which gives it a longer lifespan.Last edited by tom66; 10-19-2013, 09:15 AM.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: panasonic TC-l37x2 clicking power
You're right, i saw that but like you say essentially fluro. never heard of EEFL before but I generally don't touch LCD so my knowledge of them is low.Comment
-
Re: panasonic TC-l37x2 clicking power
I suspect that 19" TH-L19X10AK I had may have been EEFL too, 2009/2010 model.Last edited by tw2005; 10-19-2013, 09:47 AM.Comment
-
Re: panasonic TC-l37x2 clicking power
yes when I hit power button I see red light.. it stays on.. then 20 secs later I hear clicking like it's trying to do something.. then red light turns off and back on but yes it stays on no flashingComment
-
Re: panasonic TC-l37x2 clicking power
and If I try to hold the power to power it off.. red light goes off.. then it clicks again and turns red light back on..Comment
-
Re: panasonic TC-l37x2 clicking power
That sounds EXACTLY like the problem I had with my TC-L32X1.
Turns out it was the main board. Thankfully I (guessed?) correctly the first time and chose that over the power board. I've been running it for about 2 months now no problems!Comment
-
Re: panasonic TC-l37x2 clicking power
oh ok.. thank yall very much I figured it would be that.. how much was your main board ??Comment
-
Re: panasonic TC-l37x2 clicking power
All I can suggest with my only experience is the backlight cct, It's just a theory, I could be wrong. I only responded because it sounds very similar behaviour to my 19".
Q7801,7802,7803,7804 may be shorted?
I tinker with plasmas mainly.
Good to see someone else has some experience with your symptoms , hope it works out for you.Attached Filesif you find these attachements useful please consider making a small donation to the site
Last edited by tw2005; 10-19-2013, 07:04 PM.Comment
-
-
Re: panasonic TC-l37x2 clicking power
I got my main board for around $42 on ebay. But even down to your experience with holding the power button down and seeing the optical light act accordingly, all exactly like my problem before replacing the board.
Obviously I can't say with 100% certainty that is your problem, but I can tell you that is EXACTLY how mine was before I replaced the main board to fix the issue.
Good luck!Comment
-
Hello,
Stopped by this site trying to fix my parents Panasonic Plasma TV.
Model number is TH-50PZ85U
Power comes on and the red power light stays on solid.
Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.
I also hear a few clicks.
I also think my parents said there was a thunderstorm and the TV failed after that.
Section 6 in the service manual talks about power and no screen,...10-30-2024, 10:09 AM -
Hi all!
I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅
I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
https://www.badcaps.net/forum/troubl...-hardware-devi... -
HP OMEN : DAG35DMBAD0
NO power ,no short ,no corrusion
Consumption : when charger plg in = 0.004 amp
Only 3/5 vl are present when charger connected..when i put my red probe at the coils of 3/5volts and power on with my power suplly it try to rise than 0v.
when try to power on using power button i note this starnge value : 3v then 0.300v then 3v !
No light at power button led
All coils resistances :
Pl 2001 =3v measured with kohm.
pl 2004 = 5v measured with kohm
pl 6001 = 49.7ohm
pl 4012 = vccsa = 24.4 ohm
pl 3001 =... -
The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
Opened it up and discovered the power supply is making a faint clicking or ticking sound.
I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles... -
hello, �� i have been sitting on some microsoft surface pro 4 tablets for a while now. i was originally tasked with replacing the battery in one of the tablets, and ended breaking the screen and logic board in the process. decided to buy another tablet with the same specs. got that screen off successfully of the second tablet. the logic board appeared good, but i guess i shorted something out in the installation process of the logic which i've read is a common issue if there is no barrier between the logic board and battery pins. all that said, i ate costs of the repair and have...
Comment