Vizio E322VL Logo flashing White and Orange

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jstiene
    Senior Member
    • Feb 2013
    • 148
    • USA

    #1

    Vizio E322VL Logo flashing White and Orange

    Hello.

    I have a E322VL that when I plug it in, the logo flashes white and orange. I did a quick visual check and do not see any bulging caps,etc. So I was wondering if anyone else has encountered this problem on a E322VL. Any advise would be greatly appreciated.

    Thanks
    Joe
  • Sauktronics
    New Member
    • Mar 2017
    • 4
    • United States

    #2
    Re: Vizio E322VL Logo flashing White and Orange

    I have one with the same problem still don't have an answer anyone know?

    Comment

    Related Topics

    Collapse

    • Super360
      Vizio E701i-A3 Vizio logo flashing then turns off
      by Super360
      Ok so here's the story. I was watching tv one day when all of a sudden I heard a pop from the back of the tv set and rushed to unplug the set. By this time the tv already had smoke coming out the back. It was not storming or inclement weather that day to cause a power surge to the best of my abilities. When I opened the tv up, I found that the three capacitors on the psu (highlighted in red) were all bulging and looked they had exploded. I replaced all of them right away and when I went to start up the tv after the "fix" it started just showing the flashing vizio logo as soon as power...
      07-25-2024, 07:06 PM
    • Bob1394
      Vizio M65-C1 | Logo appears for 10 seconds then off
      by Bob1394
      I have used the search, and am stumped.

      My Vizio M65-C1, Vizio logo appears for about 10 seconds then goes off.Power LED blinks 15 times then the TV powers down.

      I have read through many threads on the M65-C1 including the following threads. I feel like I must be looking right past the solution to my problem:
      https://www.badcaps.net/forum/showthread.php?t=81088
      https://www.badcaps.net/forum/showthread.php?t=84241 (not clear on the Eprom actions)


      Observations

      1) [Interaction] Power turned on via TV button (or remote)...
      02-08-2023, 01:03 PM
    • x_orange90_x
      Vizio V555-G1 stuck on wallpaper; now stuck on V logo
      by x_orange90_x
      I just got this tv today and it's getting stuck on the wallpaper. When I first power it on it goes to the V logo, then a black screen for about 15 seconds, then a Chromecast error for just a few seconds, and then finally to a wallpaper. It stays frozen on this wallpaper and does not respond to anything on the remote besides power on/off. Likewise the buttons on the tv do nothing either (besides power). I did the "reset" by holding the volume down and input buttons together for 10 seconds. It showed a message at the top of the screen saying it was Wiping Data and would restart soon. After...
      12-28-2023, 06:26 AM
    • JaquesPratt
      Vizio D32f-E1 Powers on, has backlight, won't boot/no logo, no menu or video
      by JaquesPratt
      I have a Vizio D32f-E1 LCD TV that does NOT have a TCON board.

      This TV recently went through some 'death throes' and now won't boot. The first problem that began to manifest was while watching tv, the screen would 'freeze', and the image would dim over a few seconds until it was very dark. HOWEVER, the audio of the show would continue as normal. I could power off the TV for 5-20 seconds, power back on, and the video would be normal. This would occur 1-3 times when the TV was first started, and would not happen again after the TV was 'warmed up'. Not ideal, but this glitch was manageable....
      07-16-2024, 01:04 AM
    • STKR123
      Elitebooks (820, 840 etc. all gens) and those continuously flashing Power LED + flashing CapsLock LED
      by STKR123
      As the Elitebooks (820, 840 all gens) only show flashing Power LED and flashing CapsLock (continuously) + a very soft "ticking" noise near the DC Jack,
      I wonder if re-flashing the BIOS might be of any use here.

      As far as I understood, steady flashing either means insufficient power or a CPU/GPU/Motherboard issue. I use the original 65watt power supply.

      There are so many threads out there, but most of the solutions involve flashing codes, which I dont have or claim that you MUST use the original power supply, do a hard reset, reseat the RAM, clean the RAM,...
      11-03-2024, 06:58 AM
    • Loading...
    • No more items.
    Working...