Anyone encounter this problem before? When first turned on there is a black box in lower left corner, occasionally after 15-20 min the box goes away and the picture returns. The TV works perfect after that, until it is turned off for a while. Then the black box returns. You think its a bad panel or A board causing this? I know the A-board on the Panasonic Plasma TV has a high failure rate. Any thoughts?
Panasonic TH65PZ850U
Collapse
X
-
Re: Panasonic TH65PZ850U
I'm not at all familiar with this issue, but it sounds like a dying panel - perhaps, similar in a way to older LGs with dying panels that have sparkles when they're cold. -
Re: Panasonic TH65PZ850U
Since this is such a large panel, it could be that the bottom 1/3rd left and middle drivers are failing. These large panels are typically dual scanned, they have COF on top and bottom of the panel. Unlikely to be panel - more likely to be a loose connector to that portion of the COF array - on C boards.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic TH65PZ850U
My first thought is that it could not be a bad panel, since it will go away once the tv is on for 15-20 mins, perhaps warming up. So, can the bad panel be rule out and just some loose connection or bad main board causing this?Comment
-
Re: Panasonic TH65PZ850U
Yes, bad panels are very rarely temperature dependent. Probably a loose connector.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
Related Topics
Collapse
-
by BigPeteI picked up a Panasonic NH-P70G2, though it would apply to the NH-P80G2, NH-P70G1 and NH-P80G1 models as well, as maybe some other models. This one was coming up with a H86 error. After lots of testing and googling it was an error with one of the thermistors in the condenser area.
The attached French service manuals is incorrect, TH11 is gray and is a 95k thermistor and TH12 is black and is a 35k thermistor.
In my case TH12 was bad. I was able to get a 35k thermistor on AliExpress. It's 6mm in diameter.
Unfortunately the whole machine has to come apart to fix it.
I have... -
Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.
TV Model: Panasonic TC-P55ST50
...1 Photo11-20-2024, 08:52 PM -
by AquaMan UaHello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...2 Photos
-
Channel: BIOS Requests ONLY!
-
-
by stecosHi everyone!
I happened several times, in the search for help from the web, to consult this very interesting forum.
So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.
Having said that I come to the gist of my post on the forum as the title suggests.
For my passion for technology I'm now collecting several... -
by peter99helo everry body!!!
My laptop HP 245 AMD 14-FP5-6L -GDDR5X2 has a battery charging circuit error:
- If not power on, battery charge ok.
- if i turn on the power, not charging the battery ( the battery charging indicator light, from yellow to white)
The laptop only charges when not turned on. I have changed the battery and charger, but the situation remains unchanged.
I replaced the BQ 25A charging IC but the device only charges when not turned on.
everyone please help me with solution, what should i do ?
thanks a lot !!!!!... - Loading...
- No more items.
Comment