Announcement

Collapse
No announcement yet.

manuel.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    manuel.

    its a sony dlp kds-60a3000 from 2007'
    here is the problema turn tv on green light blinks 5 times tv turns on stay on for minute and a half scree go black. green light blinks 35 times tv cones on againg for a minute plus and the cycle repeats on and on.

    healp

    #2
    Re: manuel.

    Closest I have is for the A2000 series, may be close enough or completely off.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: manuel.

      Hi tom66 ihave no idea if the are close or not,i look into it
      thanks manuel 432

      Comment


        #4
        Re: manuel.

        This is from the manual:

        5 blinks = lamp Driver, Check power supply (ballast) 400v cn6501 on G board
        Ckeck ic4001 on FB1A board
        If the screen lights, then blacks out, it could be a weak lamp, as for 35 blinks there is no code for that.
        Last edited by R_J; 08-17-2013, 09:36 PM.

        Comment


          #5
          Re: manuel.

          How old is the lamp? I find that the average lamp lifespan is 2-3 years. If you pull the lamp, you can a lot of times tell visually if it is bad.

          Comment


            #6
            Re: manuel.

            to bassman I think the lamp is more than a year old, I remoobed the lamp and notice that the from glass was loos I order a new lamp I whont get it in 3 or 4 days.
            I will keep you up to day.
            manuel432

            Comment


              #7
              Re: manuel.

              RJ. try to send you some fotos two trys and they fail, I removed the fron cover to see the cb, clean the fans, they seam to be working ok, need to work sending the pictures.

              Comment


                #8
                Re: manuel.

                RJ>>> I think I got the picture problem down, hear the photos of the boards,the 1st one I think is the lamp driver all the components look ok the second is the main power board.
                another error cant upload the photos,can only send 4.7 at a time I cut down the photos 2.3 mb, got to keep trying.

                keep you posted manuel432

                Comment

                Working...
                X