manuel.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • manuel432
    Member
    • Sep 2012
    • 11
    • la

    #1

    manuel.

    its a sony dlp kds-60a3000 from 2007'
    here is the problema turn tv on green light blinks 5 times tv turns on stay on for minute and a half scree go black. green light blinks 35 times tv cones on againg for a minute plus and the cycle repeats on and on.

    healp
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: manuel.

    Closest I have is for the A2000 series, may be close enough or completely off.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • manuel432
      Member
      • Sep 2012
      • 11
      • la

      #3
      Re: manuel.

      Hi tom66 ihave no idea if the are close or not,i look into it
      thanks manuel 432

      Comment

      • R_J
        Badcaps Legend
        • Jun 2012
        • 9515
        • Canada

        #4
        Re: manuel.

        This is from the manual:

        5 blinks = lamp Driver, Check power supply (ballast) 400v cn6501 on G board
        Ckeck ic4001 on FB1A board
        If the screen lights, then blacks out, it could be a weak lamp, as for 35 blinks there is no code for that.
        Last edited by R_J; 08-17-2013, 09:36 PM.

        Comment

        • Bassman
          New Member
          • Dec 2011
          • 5

          #5
          Re: manuel.

          How old is the lamp? I find that the average lamp lifespan is 2-3 years. If you pull the lamp, you can a lot of times tell visually if it is bad.

          Comment

          • manuel432
            Member
            • Sep 2012
            • 11
            • la

            #6
            Re: manuel.

            to bassman I think the lamp is more than a year old, I remoobed the lamp and notice that the from glass was loos I order a new lamp I whont get it in 3 or 4 days.
            I will keep you up to day.
            manuel432

            Comment

            • manuel432
              Member
              • Sep 2012
              • 11
              • la

              #7
              Re: manuel.

              RJ. try to send you some fotos two trys and they fail, I removed the fron cover to see the cb, clean the fans, they seam to be working ok, need to work sending the pictures.

              Comment

              • manuel432
                Member
                • Sep 2012
                • 11
                • la

                #8
                Re: manuel.

                RJ>>> I think I got the picture problem down, hear the photos of the boards,the 1st one I think is the lamp driver all the components look ok the second is the main power board.
                another error cant upload the photos,can only send 4.7 at a time I cut down the photos 2.3 mb, got to keep trying.

                keep you posted manuel432

                Comment

                Related Topics

                Collapse

                • Biruslapio
                  Panasonic P58V11B 8 and 12 blinks error "fix"
                  by Biruslapio
                  Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

                  Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
                  04-13-2021, 07:13 AM
                • Andre Gilbert
                  Panasonic TC-P55ST50 8 blinks then no blinks
                  by Andre Gilbert
                  Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
                  Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

                  TV Model: Panasonic TC-P55ST50
                  ...
                  11-20-2024, 08:52 PM
                • Taurus12
                  Optiplex 3050 micro 2 blinks followed by 3 blinks issue
                  by Taurus12
                  Does anyone have an idea of what might be the issue with my 3050 micro? I have tried replacing new cmos battery but still the same

                  I am not sure if its the powersupply that I'm using is the issue since its the original powersupply. its a laptop powersupply with the same specifications with the 3050 micro so i guess it should be fine.

                  i also tried replacing the bios but with no avail, everytime i try another bios it gives a different blinking lights

                  Any recommendation on what I have to do next? Thanks in advance
                  06-10-2025, 05:05 PM
                • jchon
                  Sony A1e 5-blinks help
                  by jchon
                  Hi I'm new to trying to repair TVs, but I saw a broken OLED offered for a reasonable price and thought I'd try my hand at it.

                  I found the service manual, which was critical to know where to probe.
                  https://www.manualslib.com/manual/20...1e-Series.html

                  With it I was able to determine that my DKA board was bad, when P_ON#1/2 gets enabled REG_12 on the DKA board collapses. I'm assuming one of the downstream regulators has a short, but I couldn't work out which rail/component and replaced the DKA board entirely.

                  Unfortunately the 5-blinks...
                  06-28-2023, 11:52 AM
                • mmischni
                  Panasonic Viera Plasma TH-42PX75U 7 Blinks/8 Blinks/burned P board?
                  by mmischni
                  Greetings friends,

                  I have a Panasonic TH-42PX75U manufactured in 2007. It has been trouble-free until recently. One evening I turned it on and it then powered back off and gave 7 blinks.

                  First a question about the blinks. Everyone only speaks of a single number of blinks. I noticed on my TV, it blinks one fewer times for the first group of blinks, then blinks the full number repeatedly. So for my first code in question, the TV switches off, blinks 6, then blinks 7 repeatedly. When I disconnected the SC board, the TV switches off, blinks 7, then blinks 8 repeatedly....
                  09-06-2017, 08:52 PM
                • Loading...
                • No more items.
                Working...