LG 50PC3D Power Issues.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ZRICE28
    Member
    • Jul 2013
    • 19
    • USA

    #1

    LG 50PC3D Power Issues.

    Hello everyone. I'm new here and came across a few other posts from members who seem to have been experiencing similar problems to what I am. They all seemed open ended, and I haven't found a solution yet. I'm to tv repair, but learn quickly. I have had luck in the past with simple capacitor replacement on a few other tvs. This one seems to be a bit trickier.
    I picked up a lg 50pc3d. It flashed three times and powered off. I bought a cap kit and replaced 9 10v 3300 uf, and 3 others, whose values I don't have in front of me right now. Same problem, turns on, and shuts back off, now the optical light on the back comes on though. I unplugged both of the other boards from the power supply, same result. I'm lost now. Thank you in advance.
  • ZRICE28
    Member
    • Jul 2013
    • 19
    • USA

    #2
    Re: LG 50PC3D Power Issues.

    I found some of tom66's posts regarding ac detect. Just checked that, and the voltage was 4.85 and only dropped to 4.83 when it clicked itself off. Same thing with the ysus board unplugged.

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #3
      Re: LG 50PC3D Power Issues.

      And with Z-sus unplugged?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • ZRICE28
        Member
        • Jul 2013
        • 19
        • USA

        #4
        Re: LG 50PC3D Power Issues.

        Doesn't z come from y? 5v off of the power supply going to ysus is only 1.3. V-a is1.0 and drops. V-s is.068 and drops.

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: LG 50PC3D Power Issues.

          With all boards unplugged except main board, do you have 5V/Vs/Va?
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • ZRICE28
            Member
            • Jul 2013
            • 19
            • USA

            #6
            Re: LG 50PC3D Power Issues.

            with everything unplugged, nothing at 5v. v-a is .1 and dropping, v-s is .06 and dropping. y board and everything else plugged back in, .668 and holds at 5v, .50 at v-a and drops quickly, nothing at v-s. that is checking the pins leading to the ysus board. the smaller gauge wires at the bottom of the board that run down to where I tested dc detect, 5v is at 4.99

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #7
              Re: LG 50PC3D Power Issues.

              OK, can you locate the pin marked PS-ON and acquire a couple of 470 ohm resistors for a test that can be done?
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • ZRICE28
                Member
                • Jul 2013
                • 19
                • USA

                #8
                Re: LG 50PC3D Power Issues.

                I will look for ps-on when I get home tonight. Do the resistors have to be 470s? I could pull some resistors from another board that I have laying around. Or should I stop and buy a few 470s on my way home?

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK

                  #9
                  Re: LG 50PC3D Power Issues.

                  Anywhere from 100 ohm to 470 ohm should be usable.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  • ZRICE28
                    Member
                    • Jul 2013
                    • 19
                    • USA

                    #10
                    Re: LG 50PC3D Power Issues.

                    I have the resistors. All I see marked on the main and power supply boards are rl-on vavs-on and 3.3v-on

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK

                      #11
                      Re: LG 50PC3D Power Issues.

                      Can you post a picture of the particular connector?
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • ZRICE28
                        Member
                        • Jul 2013
                        • 19
                        • USA

                        #12
                        Re: LG 50PC3D Power Issues.

                        I think this is the connector you're talking about.
                        Attached Files

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK

                          #13
                          Re: LG 50PC3D Power Issues.

                          OK, please connect resistor from S-5V to RL-ON and M5V-ON. You should have +5V main and other voltages like 19V available. You should also hear a click from the PSU.
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • ZRICE28
                            Member
                            • Jul 2013
                            • 19
                            • USA

                            #14
                            Re: LG 50PC3D Power Issues.

                            Like this?
                            Attached Files

                            Comment

                            • ZRICE28
                              Member
                              • Jul 2013
                              • 19
                              • USA

                              #15
                              Re: LG 50PC3D Power Issues.

                              Same as this right?
                              Attached Files
                              Last edited by ZRICE28; 07-11-2013, 05:56 PM.

                              Comment

                              • ZRICE28
                                Member
                                • Jul 2013
                                • 19
                                • USA

                                #16
                                Re: LG 50PC3D Power Issues.

                                Ps stays running, but nothing on the screen.

                                Comment

                                • tom66
                                  EVs Rule
                                  • Apr 2011
                                  • 32560
                                  • UK

                                  #17
                                  Re: LG 50PC3D Power Issues.

                                  Yes, but do you get +19V, etc.? Vs/Va should be missing for now.
                                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment

                                  • ZRICE28
                                    Member
                                    • Jul 2013
                                    • 19
                                    • USA

                                    #18
                                    Re: LG 50PC3D Power Issues.

                                    19.17 v, 4.94 v, v-a .093, no v-s, fan is not running.
                                    Last edited by ZRICE28; 07-12-2013, 04:59 PM.

                                    Comment

                                    • tom66
                                      EVs Rule
                                      • Apr 2011
                                      • 32560
                                      • UK

                                      #19
                                      Re: LG 50PC3D Power Issues.

                                      OK, now take an additional resistor to VS ON in the same manner, do Vs and Va come up? Y-sus and Z-sus to be disconnected for now.
                                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                      Comment

                                      • ZRICE28
                                        Member
                                        • Jul 2013
                                        • 19
                                        • USA

                                        #20
                                        Re: LG 50PC3D Power Issues.

                                        I think I have it right. It's hard to get the resistors to stay in place in such a tight spot. The ps keeps wanting to turn off if the resistors aren't positioned just right. v-s is .033 drops slowly, v-a is .265 and drops faster, 19v is 19.19, 5v is 4.97.
                                        Last edited by ZRICE28; 07-17-2013, 05:17 PM.

                                        Comment

                                        Related Topics

                                        Collapse

                                        • Tynan Dill
                                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                          by Tynan Dill
                                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                          Upon bringing it home and plugging it up, it showed a standby light.

                                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                          Assuming...
                                          11-22-2024, 01:46 PM
                                        • PantherDave
                                          Microsoft Surface Pro (5th gen) model 1796 - no power
                                          by PantherDave
                                          Hi all!

                                          I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                                          I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                                          https://www.badcaps.net/forum/troubl...-hardware-devi...
                                          05-29-2024, 02:01 PM
                                        • GLISIT
                                          Asus Probook P5440UF-XB74 power issue
                                          by GLISIT
                                          Hi all,

                                          TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                                          I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                                          A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                                          01-16-2025, 02:29 PM
                                        • zlr8r
                                          Dell inspiron 17 (7786) - DP/N 09P7JP - odd power issues, starting with no power LED
                                          by zlr8r
                                          hey guys, hoping for some pointers to repair an eBay bought "faulty" laptop.

                                          Ill try and give as much info as I can.

                                          Dell Inspiron 17 (7786) Laptop
                                          Service Tag: 5J0NHT2
                                          Bios: 1.9.0

                                          When I received this , it would only flicker on the KB backlight for a second, then off and on.
                                          Then it started getting weirder!
                                          Sometimes when attaching the AC power supply, and pressing various pre-boot diagnostic keyboard keys... it did try to boot, in fact out of a hundred attempts, the laptop did actually boot into the Bios ! but never has...
                                          12-12-2023, 09:31 PM
                                        • sli4
                                          Original NES power issues
                                          by sli4
                                          I recently turned on my old NES to find the red light won't go on at all. When powered on it shows black bars on the tv and a loud buzz through the tv speakers. Powering it off, the buzz goes away and tv goes back to normal (white snow).

                                          I tested the power supply itself and it is outputting 9V as it should - first two solder joints on the board at the power port show the same.

                                          Here's where it starts getting funky - When powered on, one side of the 7805 voltage regulator is showing 18V and the other is about 8.7V (center 0).

                                          On the big blue connector I get...
                                          11-28-2024, 12:52 PM
                                        • Loading...
                                        • No more items.
                                        Working...