Venturer Led tv stuck in standyby

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Cyclopes
    New Member
    • Jul 2013
    • 3
    • England
    #1

    Venturer Led tv stuck in standyby

    Hi all,
    I have a Venturer model PLV78159S7 ( Mainboard PLV9121E13-01-01 , which is inside the Bush BTVD 91186B ?)
    Red light indicator on, the 12v rail reads 11.79 and the 5V rail reads 3.2V
    Their are know signs of any blown caps on psu board.
    Tags: None
    • japlytic
      Badcaps Legend
      • Oct 2005
      • 2085
      • Australia
      #2
      Re: Venturer Led tv stuck in standyby

      Welcome, Cyclopes!
      Picture(s) of the board would be helpful.
      Capacitors can fail without any external signs too.
      My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.

        Comment

        • Cyclopes
          New Member
          • Jul 2013
          • 3
          • England
          #3
          Re: Venturer Led tv stuck in standyby

          Taken a pic of psu board, but not clear enough.
          I will remove the psu board and run it disconnected from main board.

            Comment

            Previous template Next
            Working...