This is a LG 50" Plasma TV, model LG0-50PK250, it developed 2 vertical grey/blue lines on the center of the screen weeks ago, now another line on the right side of the two lines.
These lines are not black, so it seems it's the column driver board issues, but I'm not sure. I attached the photos to show the problem, we can see on the White Wash Mode(third photo), no lines, on the Color Wash mode(Last photo), the white color block will not show lines.
Any one has the same problem before, is this problem fixable? or just simply replace the middle column drive board (3 of them at the bottom of this set).
These lines are not black, so it seems it's the column driver board issues, but I'm not sure. I attached the photos to show the problem, we can see on the White Wash Mode(third photo), no lines, on the Color Wash mode(Last photo), the white color block will not show lines.
Any one has the same problem before, is this problem fixable? or just simply replace the middle column drive board (3 of them at the bottom of this set).
Comment