Blu-Ray Has No Power if HDMI Cable is Plugged in TV

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mn_camper
    New Member
    • Apr 2013
    • 4
    • US
    #1

    Blu-Ray Has No Power if HDMI Cable is Plugged in TV

    If we plug in the hdmi in our 32 Samsung from our Sony blu-ray player.... The player won't power on... If its plugged in another tv it comes on fine. The only thing I've done I change a few caps on the tv's power board.

    Thanks for any help!
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Blu-Ray Has No Power if HDMI Cable is Plugged in TV

      Check the CEC (consumer electronics control) settings on the TV. Some TVs tell players to turn off if CEC is enabled.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • aliougm
          Marantz SR4003 AVR HDMI board issue, seeking for help
          by aliougm
          I have problem with my AVR(Marantz SR4003) HDMI board issue. I connect to my TV but screen color distorted,see attached picture.

          Connection as below:
          Set-top box HDMI output >AVR 3 HDMI input/one HDMI output>HDTV HDMI port
          If I bypassed AVR then HDTV screen color be good.

          I take out HDMI board from AVR and check services manual the schematic shown the HDMI signals path:
          3 HDMI input port > SIL9185 chip(HDMI switch) > SIL9033 chip(HDMI receiver) > SIL9030 chip(HDMI transmitter) > HDMI output port

          I replaced all...
          04-30-2022, 12:21 PM
        • Patriarxis
          Ideapad s145-15api charging indicator LED is ON and windows shows charging (plugged in) even I have unplugged the cable
          by Patriarxis
          Hello.

          i have this problem with a lenovo ideapade s145-15api.
          The charging led stays on even when the charger is unplugged. Also in windows it shows that is charging.

          Do you have any idea?
          01-15-2025, 07:52 AM
        • howardc64
          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
          by howardc64
          Problem

          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
          08-04-2024, 10:36 PM
        • spleenharvester
          Toshiba 50UL2063DB randomly rebooting with HDMI-CEC and/or HDMI-ARC enabled
          by spleenharvester
          I have this TV hooked up to only an AppleTV 4K and a Creative soundbar. Originally HDMI-CEC and HDMI-ARC wouldn't work at all, I replaced all the HDMI cables with decent UGREEN cables meeting the latest standards, now it all works perfectly but once or twice a day the TV itself reboots while watching a program, the AppleTV keeps running. I haven't fully pinned down whether it is ARC or CEC causing it yet. All are running latest firmware.

          I assume it is just HDMI-CEC being buggy as usual on a shitty Vestel machine, but can anyone think of anything I can try before disabling it?
          03-12-2025, 03:42 PM
        • Rolin
          Lenovo Legion 5 15IMH05H No Display
          by Rolin
          I have a Lenovo Legion 5 15IMH05H 81y6003yUS that someone asked me to help them with a failing SSD. I installed a new SSD, fresh Win11 installation, updates, etc. Very standard stuff and everything was completed. He said he'll pick it up in a few days so I shut it down and set it aside.

          A few days later came and now it won't POST an image, keyboard lights up, fans spin then shuts itself off after about 40 seconds. I've already tried the typical draining capacitance and removed CMOS battery,etc. No display on an external HDMI monitor as well.. No idea what happened. Suspected a BIOS...
          06-21-2025, 11:32 PM
        • Loading...
        • No more items.
        Working...